Flexible Heaters Design Guide - BiS Sistem

Standard Polyimide and Rubber Heaters
Size (in) Size (mm) Type Resistance options- ohms* Effective area Lead Insu- Model
X Y X Y R(0°C) [May be used with Heaterstat] → NiFe Ni in² (cm²) AWG lation number
0.25 0.25 6.4 6.4 21 A 10.0 5.3 0.04 (0.26) 30 K 5565
0.25 0.50 6.4 12.7 21 A 15.0 7.9 4.3 0.08 (0.52) 30 K 5566
0.25 0.75 6.4 19.1 21 A 20.0 10.5 5.7 0.13 (0.84) 30 K 5567
0.25 1.00 6.4 25.4 21 A 25.0 13.1 7.1 3.9 0.18 (1.16) 30 K 5568
0.25 1.25 6.4 31.8 21 A 30.0 15.8 8.5 4.7 0.23 (1.48) 30 K 5569
0.25 1.50 6.4 38.1 21 A 35.0 18.4 10.0 4.7 5.4 0.27 (1.74) 30 K 5570
0.25 1.75 6.4 44.5 21 A 40.0 21.0 11.4 5.3 6.2 0.32 (2.06) 30 K 5571
0.25 2.30 6.4 58.4 6 6 17.4 9.2 5.2 0.38 (2.45) 26 K, R 5200
0.25 6.82 6.4 173.2 9 9 100 46.7 28.2 13.6 15.5 1.22 (7.87) 26 K, R 5201
0.25 7.67 6.4 194.8 8 8 143 71.7 38.1 19.1 22.2 1.15 (7.42) 30 K, R 5202
0.25 10.40 6.4 264.2 5 5 160 80.1 48.4 23.3 24.8 5.7 1.55 (10.00) 26 K, R 5203
0.27 2.00 6.9 50.8 1 1 18.9 9.5 5.7 0.35 (2.26) 26 K, R 5204
0.27 5.50 6.9 139.7 8 8 153 76.5 40.7 20.4 23.7 5.5 0.87 (5.61) 30 K 5205
0.27 6.90 6.9 175.3 1 1 220 110 65.5 32.1 34.1 7.8 1.40 (9.03) 30 K 5206
0.30 1.50 7.6 38.1 1 1 42.1 20.7 12.5 6.1 6.5 0.30 (1.94) 30 K, R 5207
0.30 3.11 7.6 79.0 1 1 44.1 22.1 13.3 6.4 6.8 0.70 (4.52) 26 K, R 5208
0.30 3.11 7.6 79.0 1 1 31.7 15.8 9.6 4.6 0.72 (4.65) 26 K, R 5209
0.34 3.47 8.6 88.1 1 1 120 56.1 33.9 16.3 18.6 0.88 (5.68) 30 K 5210
0.36 7.95 9.1 201.9 8 8 225 113 68.3 32.8 34.9 8.0 1.97 (12.71) 26 K, R 5211
0.37 6.10 9.4 154.9 1 1 73.1 36.4 22.1 10.6 11.3 1.68 (10.84) 26 K, R 5212
0.37 20.20 9.4 513.1 1 1 130 65.0 39.3 18.9 12.9 9.1 5.54 (35.74) 26 R 5213
0.40 2.60 10.2 66.0 1 1 123 62.5 37.8 18.2 19.1 0.74 (4.77) 30 K, R 5215
0.41 4.80 10.4 121.9 6 6 100 50.1 30.2 14.5 15.5 1.40 (9.03) 26 K, R 5218
0.41 8.30 10.4 210.8 5 5 61.9 31.1 18.8 9.1 6.2 4.3 9.6 2.50 (16.13) 26 K, R 5219
0.41 9.00 10.4 228.6 5 5 199 99.7 60.3 29.1 30.8 7.0 2.77 (17.87) 26 K, R 5220
0.42 2.30 10.7 58.4 1 1 50.1 26.1 15.3 7.3 7.8 0.67 (4.32) 26 K, R 5222
0.42 4.90 10.7 124.5 1 1 198 100 60.2 28.9 30.7 7.0 1.55 (10.00) 26 K 5224
0.42 7.10 10.7 180.3 1 1 322 161 85.7 42.8 49.9 11.4 2.06 (13.29) 30 K, R 5225
0.42 14.40 10.7 365.8 1 1 709 354 189 94.3 110 25.2 4.17 (26.90) 30 K 5227
0.43 3.95 10.9 100.3 8 8 238 119 63.3 31.7 36.9 8.5 1.22 (7.87) 26 K 5228
0.43 5.50 10.9 139.7 1 1 131 65.8 35.0 17.5 20.3 1.70 (10.97) 30 K, R 5229
0.43 5.90 10.9 149.9 6 6 37.3 18.8 11.3 5.4 3.7 5.8 1.87 (12.06) 26 K, R 5230
0.44 3.00 11.2 76.2 6 6 27.8 13.6 8.2 3.9 1.03 (6.65) 26 K, R 5231
0.44 3.00 11.2 76.2 6 6 45.8 22.9 13.8 6.6 7.1 1.03 (6.65) 26 K, R 5232
0.44 3.00 11.2 76.2 6 6 77.7 38.8 23.5 11.3 12.0 1.03 (6.65) 26 K, R 5233
0.45 3.88 11.4 98.6 8 8 153 76.4 40.7 20.3 23.7 5.4 1.17 (7.55) 26 K 5234
0.45 3.88 11.4 98.6 1 1 102 51.1 30.9 14.8 15.8 1.16 (7.48) 26 K, R 5235
0.45 3.88 11.4 98.6 3 3 134 67.3 40.7 19.6 20.8 1.16 (7.48) 26 K 5236
0.45 3.88 11.4 98.6 8 8 102 51.2 27.2 13.6 15.8 1.17 (7.55) 30 K, R 5237
0.46 5.10 11.7 129.5 1 1 264 132 79.9 38.4 40.9 9.4 1.77 (11.42) 26 K 5238
0.48 4.50 12.2 114.3 8 8 47.1 23.6 14.3 6.8 4.7 7.3 1.60 (10.32) 26 K, R 5239
0.48 6.28 12.2 159.5 8 8 70.2 35.1 18.7 9.3 6.2 4.7 10.9 2.20 (14.19) 26 K, R 5240
0.49 4.80 12.4 121.9 8 8 170 85.1 51.5 24.7 26.4 6.0 1.60 (10.32) 26 K, R 5241
0.50 0.50 12.7 12.7 21 A 26.5 13.9 7.5 4.1 0.19 (1.23) 30 K 5572
0.50 0.75 12.7 19.1 21 A 30.0 15.7 8.5 4.7 0.30 (1.94) 30 K, R 5573
0.50 1.00 12.7 25.4 21 A 35.0 18.3 10.0 4.6 5.4 0.41 (2.65) 30 K, R 5574
*Resistance tolerance is ±10% or ±0.5, whichever is greater
Rubber (HR) models not available with NiFe element
Introduction
Design
Guide
Polyimide
Heaters
Silicone
Rubber
Heaters (foil)
Standard
Polyimide
& Rubber
Rubber
Heaters
(wire-wound)
Mica Heaters
Thermal-Clear
Heaters
All-Polyimide
Heaters
Sensors,
Controllers &
Accessories
Reference
| Flexible Heaters Design Guide | www.minco.com
23