Flexible Heaters Design Guide - BiS Sistem

Stock Polyimide Thermofoil Heaters
Introduction Design
Guide
Polyimide
Heaters
These heaters are normally available from stock for immediate
shipment. Voltage and wattage values are for reference only.
Heaters may be operated at other voltages if they do not
exceed the maximum allowable watt density ratings.
See "Standard Polyimide & Rubber Heaters" (pages 22-31) for
these and other models with additional ordering options:
• Greater selection of resistances
• Variable lead length
• More backing options
• UL recognition marking U
Specification options
HK5160R157L12
A
Type (configuration)
X
Y
Model number
Heater backing
A = No adhesive -200 to 200°C
B = PSA backing -32 to 100°C
HK5160R157L12A = Sample part number
1 31 Y X
TAB DIMENSIONS:
AWG 30: 0.40" long × 0.25" wide (10.2 × 6.4 mm)
AWG 24/26: 0.40" × 0.40" (10.2 × 10.2 mm)
Silicone
Rubber
Heaters (foil)
Standard
Polyimide
& Rubber
Rubber
Heaters
(wire-wound)
Mica Heaters Thermal-Clear
Heaters
All-Polyimide
Heaters
Sensors,
Controllers &
Accessories
Reference
Size (inches) Size (mm) Type Resistance Typical power Effective area
in ohms*
in² (cm²) Lead
AWG
Model
X Y X Y
number
0.50 2.00 12.7 50.8 1 1 157 5 W at 28 V 0.79 (5.10) 30 HK5160R157L12
0.50 4.00 12.7 101.6 1 1 78.4 10 W at 28 V 1.67 (10.77) 30 HK5161R78.4L12
0.50 6.00 12.7 152.4 1 1 52.3 15 W at 28 V 2.35 (15.16) 30 HK5162R52.3L12
1.00 1.00 25.4 25.4 1 1 157 5 W at 28 V 0.82 (5.29) 30 HK5163R157L12
1.00 2.00 25.4 50.8 1 1 78.4 10 W at 28 V 1.76 (11.35) 30 HK5164R78.4L12
1.00 3.00 25.4 76.2 1 1 52.3 15 W at 28 V 2.70 (17.42) 30 HK5165R52.3L12
1.00 5.00 25.4 127.0 1 1 529 25 W at 115 V 4.41 (28.45) 30 HK5166R529L12
1.00 10.00 25.4 254.0 1 1 264 50 W at 115 V 8.96 (57.81) 30 HK5167R264L12
1.00 15.00 25.4 381.0 1 1 176 75 W at 115 V 13.51 (87.16) 30 HK5168R176L12
2.00 2.00 50.8 50.8 1 1 661 20 W at 115 V 3.59 (23.16) 30 HK5169R661L12
2.00 3.00 50.8 76.2 1 1 441 30 W at 115 V 5.50 (35.48) 30 HK5170R441L12
2.00 4.00 50.8 101.61 1 1 331 40 W at 115 V 7.41 (47.81) 30 HK5171R331L12
2.00 6.00 50.8 152.4 1 1 220 60 W at 115 V 11.23 (72.45) 30 HK5172R220L12
2.00 12.00 50.8 304.8 1 1 110 120 W at 115 V 22.69 (146.39) 24 HK5173R110L12
3.00 3.00 76.2 76.2 1 1 294 45 W at 115 V 8.41 (54.26) 30 HK5174R294L12
3.00 5.00 76.2 127.0 1 1 176 75 W at 115 V 14.23 (91.81) 30 HK5175R176L12
3.00 10.00 76.2 152.4 1 1 88.2 150 W at 115 V 28.75 (185.48) 24 HK5176R88.2L12
3.00 15.00 76.2 381.0 1 1 58.8 225 W at 115 V 43.30 (279.35) 24 HK5177R58.8L12
4.00 4.00 101.6 101.6 1 1 165 80 W at 115 V 15.20 (98.06) 30 HK5178R165L12
4.00 8.00 101.6 203.2 1 1 82.7 160 W at 115 V 30.84 (198.97) 24 HK5179R82.7L12
4.00 12.00 101.6 304.8 1 1 55.1 240 W at 115 V 46.48 (299.87) 24 HK5180R55.1L12
5.00 5.00 127.0 127.0 1 1 106 125 W at 115 V 24.02 (154.97) 24 HK5181R106L12
5.00 10.00 127.0 254.0 1 1 52.9 250 W at 115 V 48.57 (313.35) 24 HK5182R52.9L12
5.00 15.00 127.0 381.0 1 1 35.3 375 W at 115 V 73.12 (471.74) 24 HK5183R35.3L12
10.00 10.00 254.0 254.0 1 1 26.4 500 W at 115 V 97.52 (629.16) 20 HK5184R26.4L12
10.00 15.00 254.0 381.0 1 1 17.6 750 W at 115 V 146.92 (947.87) 20 HK5185R17.6L12
0.50 0.09 12.7 2.4 31 K 25.0 1 W at 5 V 0.13 (0.84) 30 HK5186R25.0L12
1.00 0.09 25.4 2.4 31 K 157 5 W at 28 V 0.68 (4.39) 26 HK5187R157L12
3.00 0.12 76.2 3.1 31 K 378 35 W at 115 V 6.61 (42.65) 26 HK5188R378L12
*Resistance tolerance is ±10% or ±0.5 Ω, whichever is greater
Note: Standard leadwire length is 12" (305mm) minimum
Specifications subject to change
18
Sal es and Support
|
Americas: 763.571.3121 | Europe: (33) 5 61 03 24 01 | Asia Pacific: (65) 6511 3388