Dust-Measurement - Paul Gothe GmbH
Dust-Measurement - Paul Gothe GmbH Dust-Measurement - Paul Gothe GmbH
Key 1 Entry nozzle 7 Dynamic pressure measurement 2 Filter holder 8 Support tube („in stack“ device) 3 Pitot tube 9 Cooling and drying system 4 Temperature sensor 10 Suction unit and gas metering device 5 Temperature indicator 11 Pressure gauge 6 Static pressure measurement Figure 3 — Example of "in-stack" filter sampling system 6
Key 1 Entry nozzle 7 Dynamic pressure measurement 2 Filter holder 8 Suction tube („out-stack“ device) 3 Pitot tube 9 Cooling and drying system 4 Temperature sensor 10 Suction unit and gas metering device (see Figure 5) 5 Temperature indicator 11 Pressure gauge 6 Static pressure measurement Figure 4 — Example of "out-stack" filter sampling system 7
- Page 1 and 2: Dust-Measurement Stationary source
- Page 3 and 4: 4 Sampling points The sampling plan
- Page 5: Alternatively, other measurement de
- Page 9 and 10: evaporation when heating; c) glass
- Page 11 and 12: The solutions are transferred caref
- Page 13 and 14: No mechanical cleaning shall be app
- Page 15 and 16: 10. Determination of flow direction
- Page 17 and 18: Table C.1 gives values of Ki as a p
- Page 19 and 20: i Table C.2 — Values of Ki as a p
Key<br />
1 Entry nozzle 7 Dynamic pressure measurement<br />
2 Filter holder 8 Support tube („in stack“ device)<br />
3 Pitot tube 9 Cooling and drying system<br />
4 Temperature sensor 10 Suction unit and gas metering device<br />
5 Temperature indicator 11 Pressure gauge<br />
6 Static pressure measurement<br />
Figure 3 — Example of "in-stack" filter sampling system<br />
6