Schrader Bellows - Parker

BPL-2
Catalog SB0106-6
Specifications/Mountings
Heavy-Duty Hydraulic Cylinders
PH-2 Series
Standard Specifications
• Heavy Duty Service – ANSI/(NFPA) T3.6.7R2-1996
Mounting and Specification Dimensions
• Standard Construction – Square Head – Tie Rod Design
• Nominal Pressure – 3000 P.S.I.*
• Standard Fluid – Hydraulic Oil
• Standard Temperature – -10° F to +165° F
• Bore Sizes – 1 1 /2" through 6"
• Piston Rod Diameter – 5 /8" through 4"
• Mounting Styles – 16 standard styles at various
application ratings
• Standard – Externally removable bolted bushing assembly
• Strokes – Available in any practical stroke length
• Cushions – Optional at either end or both ends of stroke.
“Float Check” at cap end.
• Rod Ends – Three Standard Choices – Specials to Order
* If hydraulic operating pressure exceeds 3000 P.S.I., send
application data for engineering evaluation and recommendation.
See Section C, Application Engineering Data for actual design
factors.
In line with our policy of continuing product improvement, specifications in this catalog are subject to change.
Mounting Styles
Tie Rods Extended Head Rectangular Flange Head Square Flange Head Rectangular
BOTH ENDS NFPA MX1
CAP END NFPA MX2
HEAD END NFPA MX3
NFPA MF1
NFPA MF5
NFPA ME5
Cap Rectangular Flange Cap Square Flange Cap Rectangular Side Lug
B
NFPA MF2 NFPA MF6 NFPA ME6 NFPA MS2
Side Tap Cap Fixed Clevis Cap Fixed Eye with
Spherical Bearing
Head Trunnion
PH-2
PH-3
PHX
NFPA MS4 NFPA MP1 NFPA MPU3 NFPA MT1
Cap Trunnion
Intermediate Trunnion
SH/SHG SHM
NFPA MT2
NFPA MT4
51
www.schraderbellows.com
Schrader Bellows
Des Plaines, IL USA