View - Philips

You can use the phone while it is charging. If
the battery is completely flat, the battery
symbol will only reappear after a few minutes
of charging.
Set clock
1. Check that your phone is switched on.
Long press ) if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-digit
secret code of your SIM card. It is
preconfigured and communicated to you by
your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
2. On idle screen, tap on Menu and go to Settings
> General > Time & date.
Set format: Select the time (12-hour or 24-hour
clock) and date format by pressing the
navigation keys , +, -, and OK.
Set time/date: Enter the time and date.
Tap on the box to be defined. To enter your
desired digits, tap + or -repeatedly, or long
press on + or - until you reach the desired
digits.
3. To select how to display the time, go to
Settings > General > Time & date > Display time:
Analog clock: Tap to show the time in a clock.
Digital clock: Tap to show the time in digits.
Tap OK to confirm.
Display local and international clocks
You can display two clocks on the idle screen, one
showing your local time and one the time of your
destination.
1. Check that you have set your local time and
date.
2. Go to Tools > World clock.
Local setting/Foreign setting: Tap < or > repeatedly
to select a city. If necessary, tap Options to turn
Daylight saving/Daylight saving for foreign city on
or off.
Getting Started 9