T2 Supracondylar Nailing System - Stryker

More documents

Recommendations

Info

Ordering Information − Instruments REF Description REF Description Standard Instruments 0152-0218 K-Wire, Ø1.8×310mm (2×) 1806-0045 Awl, Straight 1806-1095 Guide Wire Handle 1806-1096 Guide Wire Handle Chuck Optional Instruments 1806-0032 Awl Plug 1806-4260S Drill Ø4.2×340mm, AO (2×) 1806-4290S Drill Ø4.2×230mm, AO (2×) 1806-5020S Drill Ø5.0×340mm, AO (2×) 1114-6004 Spanner, SW 12 1806-2012 Rigid Reamer, Ø12mm 1806-0020 Guide Wire Ruler 1806-0050 K-Wire Ø3×285mm (2×) 1806-0110 Universal Rod 1806-0125 Reduction Spoon 1806-0130 Wrench, 8mm/10mm 1806-0170 Slotted Hammer 1806-0185 Tissue Protection Sleeve, Long 1806-0215 Drill Sleeve, Long 1806-0229 Screwdriver Shaft AO, Long 1806-0232 Screwdriver, Long 1806-0255 Screwdriver, Condyle Screw (2×) 1806-0257 Revision Condyle Screwdriver Bit 1806-0294 Screw Driver Shaft, 3.5×85mm 1806-0315 Trocar, Long 1806-0325 Screw Gauge, Long 1806-0350 Extraction Rod, Conical, 8mm 1806-0480 Screw Gauge, Femur 702429 Teardrop Handle, AO 703165 Protection Sleeve Retrograde 1806-3300 Target Device SCN, complete (Nail Adapter, Targeting Arm, Targeting Arm Proximal) 1806-3301 Nail Adapter, SCN 1806-3302 Targeting Arm, SCN 1806-3305 Targeting Arm Proximal, SCN 1806-3307 Nail Holding Screw, SCN 1806-3306 X-Ray Template, SCN 1806-4260 Drill Ø4.2×340mm, AO (2×) 1806-4290 Drill Ø4.2×230 mm, AO (2×) 1806-5020 Drill Ø5.0×340mm, AO (2×) 1806-9200 Instrument Tray SCN 1806-9210 Add-on Instrument Tray SCN * Instruments designated “Outside of the U.S.” may not be ordered for the U.S. market. 26
Ordering Information − Instruments Bixcut Complete range of modular and fixed-head reamers to match surgeon preference and optimize O. R. efficiency, presented in fully sterilizable cases. Large clearance rate resulting from reduced number of reamer blades coupled with reduced length of reamer head to give effective relief of pressure and efficient removal of material. Cutting flute geometry optimized to lower pressure generation. Forward- and side-cutting face combination produces efficient material removal and rapid clearance. Double-wound shaft transmits torque effectively and with high reliability. Low-friction surface finish aids rapid debris clearance. Smaller, 6 and 8mm shaft diameters significantly reduce IM pressure. Typical Standard Reamer Ø14mm C le a r a nc e a re a : 32% of cross section Bixcut Reamer Ø14mm Clearance area : 59% of cross section Studies 1 have demonstrated that the pressures developed within the medullary cavity through the introduction of unreamed IMnails can be far greater than those developed during reaming − but this depends very much upon the design of the reamer. After a three year development study 2 involving several universities, the factors that determine the pressures and temperatures developed during reaming were clearly established. These factors were applied to the de - velopment of advanced reamers that demonstrate significantly better per - form ance than the best of previous designs. Bixcut 1 Jan Paul M. Frolke, et al. ; Intramedullary Pressure in Reamed Femoral <strong>Nailing</strong> with Two Different Reamer Designs., Eur. J. of Trauma, 2001 #5 2 Medhi Massau, et al.; Pressure Changes During Reaming with Different Parameters and Reamer Designs, Clinical Orthopaedics and Related Research Number 373, pp. 295-303, 2000 27
Page 1 and 2: T2 Supracondylar Nailing System Ope
Page 3 and 4: Contents Page 1. Introduction 4 Imp
Page 5 and 6: Introduction Technical Details 0mm
Page 7 and 8: Instruments Nail Adapter, SCN (1806
Page 9 and 10: Indications Indications The T2 SCN
Page 11 and 12: Operative Technique Entry Point Not
Page 13 and 14: Operative Technique Bixcut Reamer T
Page 15 and 16: Operative Technique Guided Distal L
Page 17 and 18: Operative Technique Proximal Lockin
Page 19 and 20: Operative Technique Turn and pull b
Page 21 and 22: Operative Technique Guided Proximal
Page 23 and 24: Operative Technique Nail Removal Na
Page 25: Ordering Information − Implants 5
Page 29 and 30: Notes 29
Page 31 and 32: Notes 31

T2 Supracondylar Nailing System - Stryker

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?