Solutions for the Wrist - Stryker
Solutions for the Wrist - Stryker Solutions for the Wrist - Stryker
Introduction The Distal Radius and Carpals Fractures of the Distal Radius and Carpals account for over 20% of all fractures annually. These fractures also afflict the young and old alike. Additonally, surgeons are treating a large number of repetitive stress disorders. For this reason, today’s surgeons need many treatment options in order to effectively rehabilitate their patients. Stryker® realizes this need, and through continued innovation, offers a full line of implants and instruments dedicated to the treatment fractures and disorders of the wrist. 2
Plating Systems VariAx Polyaxial Locking Plate System The VariAx Distal Radius Plating System represents the next generation of bone fixation for virtually all of your Distal Radius fracture needs. It is designed to offer a comprehensive selection of plates, screws, pegs and unique instrumentation necessary to maintain the stability of the distal radius lesion, while providing your surgical staff a user-friendly module layout. Left Anatomical Volar Plates Right Universal Volar Plates Dorsal Plates Radial Column Plates Ulnar Column Plates Plates All plates are made of pure titanium, and they are treated with Type 2 Annodisation to limit tissue adherence. Each hole is capable of 15° locking screw trajectory in any direction. The 2mm profile height of the plate provides added strength to the plate/screw construct. Screws 2.0mm Smooth Locking 2.3mm Locking 2.7mm Locking 2.7mm Partial Thread Locking 2.3mm Non- Locking 2.7mm 2.7mm Non- Partial Thread Locking Non-Locking All screws are made of a titanium alloy, and are offered in both 2.3mm and 2.7mm diameters in locked and nonlocked designs. 2.0mm Locking Pegs are also offered in the system. 3
- Page 1: Solutions for the Wrist Variax, Mat
- Page 5 and 6: Cannulated Screw Systems Asnis III
- Page 7 and 8: Instrumentation KnifeLight - Instru
Plating Systems<br />
VariAx Polyaxial<br />
Locking Plate<br />
System<br />
The VariAx Distal Radius Plating<br />
System represents <strong>the</strong> next generation<br />
of bone fixation <strong>for</strong> virtually all of<br />
your Distal Radius fracture needs. It is<br />
designed to offer a comprehensive<br />
selection of plates, screws, pegs and<br />
unique instrumentation necessary to<br />
maintain <strong>the</strong> stability of <strong>the</strong> distal<br />
radius lesion, while providing your<br />
surgical staff a user-friendly module<br />
layout.<br />
Left<br />
Anatomical<br />
Volar Plates<br />
Right<br />
Universal<br />
Volar Plates<br />
Dorsal<br />
Plates<br />
Radial<br />
Column<br />
Plates Ulnar<br />
Column<br />
Plates<br />
Plates<br />
All plates are made of pure titanium,<br />
and <strong>the</strong>y are treated with Type 2<br />
Annodisation to limit tissue adherence.<br />
Each hole is capable of 15° locking<br />
screw trajectory in any direction. The<br />
2mm profile height of <strong>the</strong> plate<br />
provides added strength to <strong>the</strong><br />
plate/screw construct.<br />
Screws<br />
2.0mm<br />
Smooth<br />
Locking<br />
2.3mm<br />
Locking<br />
2.7mm<br />
Locking<br />
2.7mm<br />
Partial Thread<br />
Locking<br />
2.3mm<br />
Non-<br />
Locking<br />
2.7mm 2.7mm<br />
Non- Partial Thread<br />
Locking Non-Locking<br />
All screws are made of a titanium alloy,<br />
and are offered in both 2.3mm and<br />
2.7mm diameters in locked and nonlocked<br />
designs. 2.0mm Locking Pegs<br />
are also offered in <strong>the</strong> system.<br />
3
Change language