Pantera SA 2M30 - Frame Grabbers

Pantera SA DS -21-02M30 and DS-22-02M30 User’s Manual 55
Item (when programmable configuration the
options are separated with a | )
Configuration Definition
Cx= HDW, Number of Output Taps, Bit Width,
Number of Processing Nodes where
Cx is the configuration ID x is
HDW is
Number of Output Taps is
Bit width is
Number Processing Nodes is
Tap Reconstruction
In some configurations the reconstruction may
change. C0 is the default output format and must be
listed. Output configurations that don’t conform are
listed separately.
Pantera SA 2M30
When svm=0
C1 = Base 2,10,1
C2 = Base, 2 ,8, 1
When svm=4
C3 = Base, 2, 10, 1
C4 = Base, 2, 8, 1
When svm=8
C5 = Base, 2, 10, 1
C6 = Base, 2, 8, 1
When svm=12
C7 = Base, 2, 10, 1
C8 = Base, 2, 8, 1
For details on the svm command,
see section 3.13 Generating Test
Patterns.
When svm=0
C1, T1 (1, 800, 1, 1, 1200, 1)
C1, T2 (801, 1600, 1, 1, 1200, 1)
C2, T1 (1, 800, 1, 1, 1200, 1)
C2, T2 (801, 1600, 1, 1, 1200, 1)
When svm=4
C3, T1 (800, 1, -1, 1, 1200, 1)
C3, T2 (801, 1600, 1, 1, 1200, 1)
C4, T1 (800, 1, -1, 1, 1200, 1)
C4, T2 (801, 1600, 1, 1, 1200, 1)
When svm=8
C5, T1 (1, 800, 1, 1, 1200, 1)
C5, T2 (1600, 801, -1, 1, 1200, 1)
C6, T1 (1, 800, 1, 1, 1200, 1)
C6, T2 (1600, 801, -1, 1, 1200, 1)
When svm=12
C7, T1 (800, 1, -1, 1, 1200, 1)
C7, T2 (1600, 801, -1, 1, 1200, 1)
C8, T1 (800, 1, -1, 1, 1200, 1)
C8, T2 (1600, 801, -1, 1, 1200, 1)
For details on the svm command,
see section 3.13 Generating Test
Patterns.
DALSA 03-32-10150-01