Pantera SA 2M30 - Frame Grabbers

More documents

Recommendations

Info

Pantera SA DS -21-02M30 and DS-22-02M30 User’s Manual 18 DALSA 03-32-10150-01
Pantera SA DS -21-02M30 and DS-22-02M30 User’s Manual 19 Software Interface: How to Control the Camera 3 3.1 Overview i This section contains some of the more commonly used commands. See Communications Protocol on page 55 for the complete syntax and command reference (including command shortcuts) for the camera’s serial interface. All camera features can be controlled through the serial interface. The camera can also be used without the serial interface after it has been set up correctly. Functions available include: • Controlling basic camera functions such as gain and choice of sync signal source (internal or external) • Camera calibration • Measuring some internal temperature and voltages • Capturing video • Generating a test pattern for debugging • Setting an area of interest The serial interface uses a simple ASCII-based protocol. The complete protocol is described in the Communications Protocol on page 57. Online Help For quick help, the camera can return all available commands and parameters through the serial interface. To generate this list, send the command h to the camera. Retrieving Camera Settings To read current camera settings, send the command gcp. DALSA 03-32-10150-01
Page 1 and 2: 1.6k x 1.2k Stop Action Area Scan C
Page 3 and 4: Pantera SA DS -21-02M30 and DS-22-0
Page 17: Pantera SA DS -21-02M30 and DS-22-0
Page 69 and 70:
Pantera SA DS -21-02M30 and DS-22-0
Page 71 and 72:
Output Pantera SA DS -21-02M30 and
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87:
show all

Pantera SA 2M30 - Frame Grabbers

Create successful ePaper yourself

Delete template?

Save as template?