You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Pantera</strong> <strong>SA</strong> DS -21-0<strong>2M30</strong> and DS-22-0<strong>2M30</strong> User’s Manual 17<br />
The camera requires a single voltage input (+11V to +25V). The camera meets all<br />
performance specifications using standard switching power supplies, although wellregulated<br />
linear supplies provide optimum performance.<br />
When setting up the camera’s power supplies follow these guidelines:<br />
• Protect the camera with a fast-blow fuse between power supply and camera.<br />
• Do not use the shield on a multi-conductor cable for ground.<br />
• Keep leads as short as possible to reduce voltage drop.<br />
• Use high-quality linear supplies to minimize noise.<br />
!<br />
Note: Performance specifications are not guaranteed if your power supply does not meet<br />
these requirements. See section 1.3 for power requirements.<br />
WARNING: It is extremely important that you apply the appropriate voltages to your camera. Incorrect voltages<br />
will damage the camera. Protect the camera with a fast-blow fuse between power supply and camera.<br />
DAL<strong>SA</strong> offers a power supply with attached 6’ power cable that meets the <strong>2M30</strong>’s<br />
requirements, but it should not be considered the only choice. Many high quality supplies<br />
are available from other vendors. DAL<strong>SA</strong> assumes no responsibility for the use of these<br />
supplies.<br />
Visit the www.dalsa.com Web site for a list of companies that make power supplies that<br />
meet the camera’s requirements. The companies listed should not be considered the only<br />
choices.<br />
DAL<strong>SA</strong> 03-32-10150-01
Change language