2M30 User Manual - Frame Grabbers

More documents

Recommendations

Info

DS-24-02M30 and DS-25-02M30 User’s Manual 30 Table 11: Pantera SA 2M30 Video Modes Mode Description Example Image 0 Normal operating mode A 1 Test pattern left side 2 Test pattern right side 3 Test pattern both sides 4 Flip image left side W 5 Flip image left side. Test pattern left side 6 Flip image left side. Test pattern right side 7 Flip image left side. Test pattern both sides 8 Flip image right side A W 9 Flip image right side. Test pattern left side 10 Flip image right side. Test pattern right side 11 Flip image right side. Test pattern both sides 12 Flip image both sides 13 Flip image both sides. Test pattern left side 14 Flip image both sides. Test pattern right side 15 Flip image both sides. Test pattern both sides DALSA 03-32-10157-02
DS-24-02M30 and DS-25-02M30 User’s Manual 31 Optical, Mechanical, Thermal, and Handling Considerations 4 4.1 Mechanical Interface Mounting The camera can be mounted using the M3 holes (metric-threaded) on its base or top, and on its front plate at the corners. Environment The camera and cables should be shielded from environmental noise sources for best operation. The camera should also be kept as cool as possible. The specified operating temperature is 10–40°C measured at the bottom plate. Mounting holes (refer above) allow you to attach the necessary heat sinking. DALSA 03-32-10157-02
Page 1 and 2: Pantera SA 2M30 1920 x 1080 Stop Ac
Page 3 and 4: DS-24-02M30 and DS-25-02M30 User’
Page 29: DS-24-02M30 and DS-25-02M30 User’
Page 67 and 68: Output DS-24-02M30 and DS-25-02M30
Page 81 and 82:
DS-24-02M30 and DS-25-02M30 User’
Page 83:
DS-24-02M30 and DS-25-02M30 User’
show all

2M30 User Manual - Frame Grabbers

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?