Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers

90
Spyder 3 GigE User Manual
Exposure Time: 200.00 uSec Current exposure time
setting. Value is set
with the 124Hset command.
See section 303HA1.4
Exposure Mode,
Readout Mode, Line
Rate and Exposure
Time for details.
CCD Direction: internal/forward Current direction
setting set with scd
command. Refer to
section 304HA1.2 CCD Shift
Direction for details.
Horizontal Binning: 1 Current horizontal
binning factor set with
the sbh command.
Video Mode: video Current video mode
value set with the 125Hsvm
command. See section
305HA4.1 Generating a Test
Pattern for details.
Region of Interest: (1,1) to (2048, 1) Region of interest size
set with the 126Hroi
command. See section
306HA2.1 Setting a Region of
Interest (ROI) for
details.
End-Of-Line Sequence: on States whether an end
of line sequence is
turned on or off. Set
using the 127Hels
command. See section
307HA2.3 End-of-line
Sequence for details.
FFC Coefficient Set: 0 Current pixel coefficient
set loaded. Refer to
section 308HA3.1 Saving and
Restoring PRNU and
FPN Coefficients for
details.
FPN Coefficients: off States whether FPN
coefficients are on or
off. Set with the 128Hepc
command. Refer to
section 309HA2.2 Analog
and Digital Signal
Processing Chain for
details.
PRNU Coefficients: off States whether PRNU
coefficients are on or
off. Set with the 129Hepc
command. Refer to
section 310HA2.2 Analog
and Digital Signal
Processing Chain for
details.
03-032-10158-06 DALSA