Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
88<br />
<strong>Spyder</strong> 3 <strong>GigE</strong> User <strong>Manual</strong><br />
A4.5 <strong>Camera</strong> Frequency Measurement<br />
Purpose:<br />
Syntax:<br />
Syntax Elements:<br />
Returns the frequency for the requested <strong>Camera</strong> Link control<br />
signal<br />
gsf i<br />
i<br />
<strong>Camera</strong> Link control signal to measure:<br />
1: CC1 (EXSYNC)<br />
2: CC2 (PRIN)<br />
3: CC3 (CCD Direction)<br />
4: CC4 (Spare)<br />
Note: • <strong>Camera</strong> operation may be impacted when entering the gsf<br />
command (i.e., poor time response to direction change or<br />
video may have artifacts (gain changes) for several lines<br />
while the camera returns signal information)<br />
• This command is not available when operating the camera<br />
with external CCD direction control (scd 2)<br />
Example: gsf 1<br />
A4.6 Returning the LED Status<br />
Purpose:<br />
Syntax:<br />
Returns the status of the camera’s LED.<br />
gsl<br />
The camera returns one of the following values:<br />
1 = red (loss of functionality)<br />
2 = green (camera is operating correctly)<br />
5 = flashing green (camera is performing a function)<br />
6 = flashing red (fatal error)<br />
Notes: • Refer to section 296H2.5 <strong>Camera</strong> LED for more information on<br />
the camera LED<br />
03-032-10158-06 DALSA
Change language