Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers

78
Spyder 3 GigE User Manual
Notes: • When subtracting a digital value from the digital video signal
the output can no longer reach its maximum. Use the 98Hssg
command to correct for this where:
Related Commands:
100Hssg
Example ssb 0 25
ssg value =
max output value
max output value ‐ ssb value
See the following section for details on the 99Hssg command.
Setting Digital System Gain
Purpose:
Syntax:
Syntax Elements:
Improves signal output swing after a background subtract. When
subtracting a digital value from the digital video signal, using the
101Hssb command, the output can no longer reach its maximum. Use
this command to correct for this where:
ssg value =
max output value
max output value ‐ ssb value
ssg t i
t
i
Tap selection. Allowable range is 1 to 2, or 0 for all taps.
Related Commands:
103Hssb
Gain setting. The gain ranges are 0 to 65535. The digital
video values are multiplied by this value where:
i
Digital Gain=
4096
Use this command in conjunction with the 102Hssb
command.
Example: ssg 1 15
03-032-10158-06 DALSA