Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers

62
Spyder 3 GigE User Manual
i
Applies to Modes 2 and
7
Setting the Line Rate
Purpose:
Syntax:
Sets the camera’s line rate in Hz. Camera must be operating in
exposure mode 2 or 7.
ssf f
Syntax Elements:
i
Desired line rate in Hz. Allowable values are:
1k 1 tap: 300-36000 Hz
1k 2 tap: 300-68000 Hz
2k 1 tap: 300-18500 Hz
2k 2 tap: 300-36000 Hz
Notes: • To read the current line frequency, use the command 29Hgcp or
30Hget ssf.
• If you enter an invalid line rate frequency, an error message is
returned.
Related Commands:
31Hsem, 32Hset
Example: ssf 10000
i
Applies to Modes 2 and
8
Setting the Exposure Time
Purpose:
Syntax:
Sets the camera’s exposure time is µs. Camera must be operating in
mode 2, 6, or 8.
set f
Syntax Elements:
i
Desired exposure time in µs. Allowable range is 3 to 3300µs.*
Notes: • To read the current line frequency, use the command 33Hgcp or
34Hget set.
• If you enter an invalid line rate frequency, an error message is
returned.
• *The exposure time range is based on the current line rate.
• To determine the maximum exposure time allowed for the
current line rate, use the command get ger.
Related Commands:
35Hsem, 36Hssf
Example: set 400.5
03-032-10158-06 DALSA