Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
24<br />
<strong>Spyder</strong> 3 <strong>GigE</strong> User <strong>Manual</strong><br />
• One 15-pin general purpose input/output (GPIO) connector. Refer to section 234H2.4.3<br />
GPIO Connector for details.<br />
Figure 8: <strong>Spyder</strong> 3 <strong>GigE</strong> Input and Output Connectors<br />
!<br />
WARNING: It is extremely important that you apply the appropriate voltages to your camera.<br />
Incorrect voltages may damage the camera. See section 2.4 for more details.<br />
2.4.1 Ethernet Connector<br />
Ethernet Connection<br />
LED@ 1Gbps (Green)<br />
Data Transmission LED<br />
(Yellow)<br />
Ethernet Connection LED<br />
Steady green indicated that an Ethernet connection is successfully established at 1Gbps.<br />
Data Transmission LED<br />
Steady yellow indicates that the camera is ready for data transmission.<br />
Flashing yellow indicates that the camera is transmitting or receiving data.<br />
EMC Compliance<br />
In order to achieve EMC compliance, the <strong>Spyder</strong> 3 camera requires the use of shielded<br />
CAT5e or CAT6 Ethernet cables.<br />
03-032-10158-06 DALSA
Change language