Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers Spyder 3 Camera User's Manual GigE Dual Line - Frame Grabbers
18 Spyder 3 GigE User Manual 2.1 Installation Overview 1 Install Ethernet card. Following the manufacturer’s instructions, install an Ethernet card. For Gigabit performance, you must install an Intel PRO/1000 Ethernet card . ! Do not install the manufacturer’s driver. You will install the appropriate QuickCam driver in step 3. 2 Install QuickCam GUI. Insert the Spyder3 GigE CDinto your CD- ROM and follow the online instructions to install the QuickCam GUI. 3 Install QuickCam driver. 1. Open the Driver Installation Tool. On the Windows task bar click Start, point to Programs—DALSA QuickCam— Tools — Launch Driver Installation Tool. 2. If you are using an Intel PRO/1000 adapter: a) On the Pro 1000 Adapters tab, right-click on an Intel PRO/1000 network interface card adapter with no installed driver (i.e. when the Device Class is Ethernet Controller). The following context menu appears: b) Choose Install High Performance IP Device Driver to install the QuickCam High Performance IP Device Driver. If you are NOT using an Intel PRO/1000 adapter: a) On the Universal IP Filter Driver tab, click, Install Filter Driver… This button installs the QuickCam Universal IP Filter Driver on ALL network adapters installed on the system that are using a network driver. This excludes PRO/1000 adapters on which the QuickCam High-Performance Driver has been installed. 03-032-10158-06 DALSA
Spyder 3 GigE User’s Manual 19 4 GPIO Connector If using an external sync, external direction control or any other external signals, connect the GPIO. 5 Connect Ethernet cable. Connect Cat 5 or Cat 6 cable from camera to computer Ethernet jack. 6 Connect power cable. Connect power cable from camera to +12 V to +15 V power supply. 7 4 Open QuickCam. On the Windows task bar click , Start point to Programs—DALSA QuickCam—DALSA QuickCam . 8 Confirm or enter your IP Address. In the Set Camera’s IP Adress dialog box, confirm or enter the camera’s IP Address. Click OK . 9 Start acquiring images. On the QuickCam toolbar, click the Continuous Grab icon. The image should be visible in the Image Output window. Note: Refer to the following sections for details on equipment recommendations and camera connector information. DALSA 03-032-10158-06
- Page 1 and 2: Spyder 3 Camera User’s Manual Gig
- Page 3 and 4: Spyder 3 GigE User’s Manual 3 Con
- Page 5 and 6: Spyder 3 GigE User’s Manual 5 Int
- Page 7 and 8: Spyder 3 GigE User’s Manual 7 •
- Page 9 and 10: Spyder 3 GigE User’s Manual 9 Ope
- Page 11 and 12: Spyder 3 GigE User’s Manual 11 Fi
- Page 13 and 14: Spyder 3 GigE User’s Manual 13 1.
- Page 15 and 16: Spyder 3 GigE User’s Manual 15 Ch
- Page 17: Spyder 3 GigE User’s Manual 17 2
- Page 21 and 22: Spyder 3 GigE User’s Manual 21 4.
- Page 23 and 24: Spyder 3 GigE User’s Manual 23 DA
- Page 25 and 26: Spyder 3 GigE User’s Manual 25 2.
- Page 27 and 28: Spyder 3 GigE User’s Manual 27 Fi
- Page 29 and 30: Spyder 3 GigE User’s Manual 29 Ta
- Page 31 and 32: Spyder 3 GigE User’s Manual 31 3
- Page 33 and 34: Spyder 3 GigE User’s Manual 33
- Page 35 and 36: Spyder 3 GigE User’s Manual 35 Vi
- Page 37 and 38: Spyder 3 GigE User’s Manual 37 4
- Page 39 and 40: Spyder 3 GigE User’s Manual 39 4.
- Page 41 and 42: Spyder 3 GigE User’s Manual 41
- Page 43 and 44: Spyder 3 GigE User’s Manual 43 5
- Page 45 and 46: Spyder 3 GigE User’s Manual 45 5.
- Page 47 and 48: Spyder 3 GigE User’s Manual 47 6
- Page 49 and 50: Spyder 3 GigE User’s Manual 49 Ca
- Page 51 and 52: Spyder 3 GigE User’s Manual 51 en
- Page 53 and 54: Spyder 3 GigE User’s Manual 53 Ap
- Page 55 and 56: Spyder 3 GigE User’s Manual 55 Pa
- Page 57 and 58: Spyder 3 GigE User’s Manual 57 A1
- Page 59 and 60: Spyder 3 GigE User’s Manual 59 Mo
- Page 61 and 62: Spyder 3 GigE User’s Manual 61 Se
- Page 63 and 64: Spyder 3 GigE User’s Manual 63 A1
- Page 65 and 66: ccg, Spyder 3 GigE User’s Manual
- Page 67 and 68: Spyder 3 GigE User’s Manual 67 To
18<br />
<strong>Spyder</strong> 3 <strong>GigE</strong> User <strong>Manual</strong><br />
2.1 Installation Overview<br />
1<br />
Install Ethernet card.<br />
Following the manufacturer’s instructions,<br />
install an Ethernet card. For Gigabit<br />
performance, you must install an Intel<br />
PRO/1000 Ethernet card .<br />
! Do not install the manufacturer’s<br />
driver. You will install the appropriate<br />
QuickCam driver in step 3.<br />
2<br />
Install QuickCam GUI.<br />
Insert the <strong>Spyder</strong>3 <strong>GigE</strong> CDinto your CD-<br />
ROM and follow the online instructions to<br />
install the QuickCam GUI.<br />
3<br />
Install QuickCam driver.<br />
1. Open the Driver Installation Tool. On the Windows task bar click Start, point to<br />
Programs—DALSA QuickCam— Tools — Launch Driver Installation Tool.<br />
2. If you are using an Intel PRO/1000 adapter:<br />
a) On the Pro 1000 Adapters tab, right-click on an Intel PRO/1000 network<br />
interface card adapter with no installed driver (i.e. when the Device Class is<br />
Ethernet Controller).<br />
The following context menu appears:<br />
b) Choose Install High Performance IP Device Driver to install the QuickCam<br />
High Performance IP Device Driver.<br />
If you are NOT using an Intel PRO/1000 adapter:<br />
a) On the Universal IP Filter Driver tab, click, Install Filter Driver… This button<br />
installs the QuickCam Universal IP Filter Driver on ALL network adapters<br />
installed on the system that are using a network driver. This excludes<br />
PRO/1000 adapters on which the QuickCam High-Performance Driver has<br />
been installed.<br />
03-032-10158-06 DALSA