TR-33 TR-34 TR-35 Trillium Rhino User's Manual - Frame Grabbers
TR-33 TR-34 TR-35 Trillium Rhino User's Manual - Frame Grabbers
TR-33 TR-34 TR-35 Trillium Rhino User's Manual - Frame Grabbers
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
30 <strong>Trillium</strong> User’s <strong>Manual</strong><br />
Activating / Deactivating Video Correction<br />
White light calibration should be performed in the field at least once to<br />
compensate for the application-specific lighting conditions.<br />
Note: Video correction is disabled if you set gains manually. To re-enable video<br />
correction, use the command restore_setting or rs if calibration results<br />
have been previously stored in the user settings (ws command), or perform a<br />
calibration using one of the correction_calibrate commands.<br />
3.10 Using the Pushbutton<br />
The pushbutton on the camera backplate triggers predefined serial commands.<br />
By default, the pushbutton triggers a white light calibration, equivalent to the<br />
command correction_calibrate 2.<br />
If you press the pushbutton during camera power-up, the camera will be forced<br />
to factory default settings, including setting the baud rate to 38.4Kbps.<br />
03-32-10119-03 DALSA
Change language