You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
INTERNAL FINISHING<br />
Introduction & technical information<br />
Important user information<br />
Brushes for internal finishing<br />
To be noted when selecting <strong>brushes</strong> for internal finishing:<br />
1. General user information<br />
Brushes for internal finishing are suitable for use with hand-held and stationary tools with drill or jaw chucks and tool<br />
spindles. Some products are designed exclusively for manual operation.<br />
2. Typical <strong>brushes</strong> for internal finishing<br />
Some typical <strong>brushes</strong> used for internal finishing are shown below. The product overview on the following pages provides<br />
details of the whole range.<br />
Helituf Novoflex-B Novoflex S1 Micro-abrasive tube brush<br />
Finding the right tool<br />
Please check your product choice using the information in the info heading. This will tell you the<br />
application for each product and its suitability, as well as providing a summary of the available trim<br />
materials suitable for the material being finished.<br />
TRIM AND MATERIAL<br />
USE<br />
Internal cleaning, general<br />
Deburring<br />
Brushing edges/tapered grooves<br />
Rust removal<br />
Cleaning threads/holes<br />
Plateau finish<br />
NHA 600/NHS 1000<br />
Nylon-diamond 400+800<br />
Orig. Osb. wire 0.08-0.20<br />
Filament brush 80-320<br />
Novofil WF 120+320<br />
crimped steel wire 0.15-0.50<br />
Nylon/Natural fibre<br />
Products available with:<br />
Steel wire twist knot<br />
Steel wire crimped<br />
Stainless steel<br />
Brass wire<br />
Abrasive bristle<br />
Nylon-Diamond<br />
Natural bristle<br />
Steel<br />
Cast steel<br />
Stainless steel<br />
Non-ferrous metal<br />
Aluminium<br />
Soft wood<br />
Hard wood<br />
132
Change language