Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
INTERNAL FINISHING<br />
Introduction & technical information<br />
PRODUCT INTRODUCTION<br />
INTERNAL FINISHING<br />
Finishing of bores, perforations, honed surfaces, longitudinal grooves, bearing bores and other<br />
internal or difficult to reach places<br />
The following chapter contains all the products used for internal finishing.<br />
With these special <strong>brushes</strong>, Osborn offer you a wide range of very high performance tools for all applications in the area<br />
of internal finishing. A detailed summary of product groups, their applications and individual areas of use can be found in<br />
the table on the following pages in the next chapter.<br />
Important note<br />
Please remember when you place your order that, for<br />
best performance, your brush diameter needs to be<br />
larger than the diameter of the bore.<br />
You can find more details in the product overview below.<br />
(e.g. Novoflex H)<br />
A detailed description of the various trim materials can be found on page 11 of the catalogue.<br />
General safety instructions<br />
Wear protective clothing to protect yourself<br />
from injury.<br />
More safety instructions and examples of<br />
usage can also be found on the Internet.<br />
For more information*<br />
click<br />
www.osborn-app.com<br />
* Network charges<br />
apply for the use of<br />
mobile websites.<br />
130