Models SRJ-7 and HRJ-7 Juno Survey Meters
Models SRJ-7 and HRJ-7 Juno Survey Meters
Models SRJ-7 and HRJ-7 Juno Survey Meters
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Bu//etin No. 764<br />
INSTRUMENTATION FOR NUCLEAR RESEARCH<br />
MODEL GS=7 BINARY SCALER<br />
0 with automatic<br />
electric reset<br />
0 predetermined count<br />
0 elasped time<br />
indicator<br />
binary scale of 256<br />
300-3000 volt<br />
detector supply<br />
APPLICATION<br />
<strong>and</strong> SCOPE OF USE.. .<br />
The Model GS-7 Binary Scaler is a general purpose,<br />
precision counting instrument which features extreme<br />
simplicity in operation, as well as unusual flexibility<br />
in counting procedui,es. It is designed for use with<br />
Geiger, scintillation, or proportional detectors, <strong>and</strong><br />
has many applications in diagnostic <strong>and</strong> therapeutic<br />
procedures in nuclear medicine, radiochemical studies,<br />
<strong>and</strong> other laboratory counting problems. Exceptional<br />
reliability is assured through the use of newly developed<br />
components of the highest quality. The GS-7 has<br />
a resolving time of 5 microseconds. For counting problems<br />
requiring shorter resolving time, the GS-7A,<br />
with 1 microsecond resolution, is available.<br />
OPERATION: The GS-7 uses 8 binary scaling<br />
stages, providing an electronic scaling factor up to<br />
256. A scale selector switch allows a wide choice of<br />
scaling speeds. The total recorded count is determined<br />
by multiplying the reading on the five-digit register<br />
by the scaling factor, <strong>and</strong> adding the values of the<br />
GS-7 Binary Scaler slcown in use<br />
with scanner for thyroid “mapping!’<br />
interpolation lights which are illuminated. Built-in<br />
features include an elapsed time indicatol., which<br />
gives the exact amount of time elapsed duiing any<br />
counting run. The GS-7 is available with eithei, a<br />
timer i,eading in seconds, or in hundredths of a minute.<br />
Either timei, indicates a total elapsed time of<br />
60 minutes.<br />
An outst<strong>and</strong>ing featu1.e of the GS-7 is the automatic<br />
electric reset button, which simultaneously resets the<br />
i.egistei., timer, <strong>and</strong> binary scale indicators in one<br />
single operation. Laboratory technicians will quickly<br />
recognize the ti.emendous value of this feature in<br />
simplifying operation <strong>and</strong> assuring faster, more efficient<br />
counting procedures.<br />
The GS-7 incorporates an accurately regulated 300-<br />
3000 volts D.C. detector supply, with extremely accurate<br />
settings accomplished by “coarse” <strong>and</strong> “fine” adjustments.<br />
A panel switch turns the high voltage on<br />
<strong>and</strong> off, without changing the voltage setting.<br />
Predetei,mined count selection is provided by a switch<br />
which enables the usel’ to automatically stop the scaling<br />
action aftel, I, 10, or 100 registel. counts. When<br />
the preset count is reached, the scaler stops, <strong>and</strong> the<br />
time requii.ed to accumulate the count is i.ead on the<br />
timer. The GS-7 may also be coupled with such external<br />
accessories as the Predetei,mined Timers PT-1,<br />
PT-2, or PT-3, to gain the added advantage of preselected<br />
counting time.<br />
T E C H N I CAL ASS 0 C I AT E S<br />
140 WEST PROVIDENCIA AVENUE BURBANK, CALIFORNIA<br />
4M-9/58<br />
Printed in U.S.A.