LATEX and WinEdt for MA4053

• angle=90 — rotate through 90 degrees, measured anti-clockwise.
• height=100mm — if you want to fix the height. Acceptable units include
mm, cm, in and pt. The width option works similarly.
You may want to adjust the horizontal and vertical positioning of you figure,
which can be done simply with the \hspace and \vspace commands
respectively. If you want to have side-by-side graphics with captions etc.,
then you may have to learn about the figure and minipage environments,
and similar constructs — google for graphicx for more information.
References
[1] The Not So Short Introduction to L A TEX 2ε, Tobias Oetiker et. al., 2002.
[2] User’s Guide for the amsmath Package (Version 2.0), American Mathematical
Society, 1999.
[These first two are included on the disc with the template.]
[3] L A TEX: A document preparation system, Leslie Lamport, 2nd revised ed.,
Addison-Wesley, Reading, MA, 1994. (686.2 LAMP)
[Note: the first edition is for L A TEX 2.09, rather than the current version
of L A TEX 2ε — but is still partly relevant.]
[4] The L A TEX companion, Michel Goossens, Frank Mittelbach, and Alexander
Samarin, Addison-Wesley, Reading, MA, 1994. (686.2 GOOS)
[Note: The first edition (1994) is not a totally reliable guide for the
amsmath package. I have the recently published second edition.]
27