MINI MCR-SL-UI-REL(-SP) - Onlinecomponents.com
MINI MCR-SL-UI-REL(-SP) - Onlinecomponents.com
MINI MCR-SL-UI-REL(-SP) - Onlinecomponents.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>MINI</strong> <strong>MCR</strong>-<strong>SL</strong>-<strong>UI</strong>-<strong>REL</strong>(-<strong>SP</strong>)<br />
Installation<br />
Cables may only be snapped on and connected in potentially explosive areas when the power is<br />
disconnected.<br />
Screw Connection<br />
Spring-Cage Connection<br />
2<br />
1<br />
Figure 2<br />
<strong>MINI</strong> <strong>MCR</strong>-<strong>SL</strong>-<strong>UI</strong>-<strong>REL</strong><br />
Figure 3<br />
The assignment of the connection terminal blocks is shown in Figure 4.<br />
Block Diagram<br />
<strong>MINI</strong> <strong>MCR</strong>-<strong>SL</strong>-<strong>UI</strong>-<strong>REL</strong>-<strong>SP</strong><br />
Installation and startup must only be carried out by qualified personnel. The relevant country-specific<br />
regulations (e.g., VDE, DIN) must also be observed.<br />
Notes on explosion protection:<br />
The device is a category 3 item of electrical equipment. Follow the instructions provided during installation. The<br />
device must be installed in housing with IP54 protection according to EN 60529. The specified limits for<br />
mechanical strain or thermal loads for the device must not be exceeded. Only devices suitable for operation in<br />
zone 2 potentially explosive areas may be connected. Repairs must not be carried out by the user.<br />
7<br />
1 7 1 #<br />
/ , $<br />
)<br />
,<br />
+<br />
online<strong>com</strong>ponents.<strong>com</strong><br />
, +<br />
14 12<br />
11<br />
<br />
!<br />
"<br />
+<br />
"<br />
<br />
<br />
1<br />
9<br />
, +<br />
ME 6,2 TBUS-2...<br />
%<br />
&<br />
7 * <br />
/ ,<br />
8<br />
Figure 4<br />
Block diagram<br />
The <strong>MINI</strong> Analog module can be snapped onto all 35 mm DIN rails according to EN 60715.<br />
102132_02_en PHOENIX CONTACT 4