UM EN FLX ASI SYS PRO INST - Onlinecomponents.com

More documents

Recommendations

Info

UM EN FLX ASI SYS PRO INST 4.3 Description for AS-i Control Cabinet Modules Versions An AS-Interface system contains digital AS-i control cabinet modules with the following functions: - DI Digital input modules acquire digital control signals from the process level. These signals are transferred to the higher-level automation equipment via the bus. The signal status is indicated on the module using LEDs. The sensors are connected via plug-in COMBICON connections. The sensors are either supplied from the sensor voltage U LS (26.5 V to 31.6 V from AS-Interface) or from an external power supply unit. - DIO Digital I/O modules have digital inputs and digital outputs. They acquire digital control signals from the process level. These signals are transferred to the higher-level automation equipment via the bus. The sensors are connected via plug-in COMBICON connections. The sensors are supplied from the sensor voltage U S . Digital I/O modules transfer the digital control signals from the automation equipment to the process level at the actuators. For the specified load currents for the outputs of the various modules, please refer to the data sheet. The actuators are connected via plug-in COMBICON connections. The outputs are protected against short circuits and overloads. The actuators are supplied from the auxiliary voltage AUX. The signal status is indicated on the device using LEDs. Connection Degree of protection The bus, I/O devices, and supply are connected via plug-in COMBICON connections. The modules have IP20 protection. 4.3.1 Product Versions for AS-i Control Cabinet Modules The following control cabinet modules are available from Phoenix Contact for the AS-i system: Description Order Designation Order No. AS-Interface input module with four digital inputs ASI IO ME DI 4 AB 2741671 (AB slave) AS-Interface I/O module with four digital inputs ASI IO ME DIO 4/3 AB 2741668 and three digital outputs (AB slave) AS-Interface I/O module with four digital inputs and four digital outputs (AB slave) ASI IO ME DIO 4/4 AB 2773542 onlinecomponents.com 4-24 PHOENIX CONTACT 7513_en_01
Slaves 4.3.2 Description for ASI IO ME DI 4 AB The ASI IO ME DI 4 AB is an AS-Interface input module with four digital inputs (AB slave). It is used to input digital signals in the control cabinet. Components The module consists of the following components: 1 Plug-in COMBICON connections 2 Diagnostic and status indicators 3 Female addressing connector Figure 4-26 Module view Features – Four digital signal inputs – Diagnostic and status indicators – Female addressing connector – AB slave with extended addressing options for up to 62 AS-i slaves – Plug-in COMBICON connections – Communication monitoring – Inputs for 2 and 3-wire sensors – Inputs supplied from either the AS-i supply or the external auxiliary voltage – IP20 protection onlinecomponents.com ! $ $ # ) 7513_en_01 PHOENIX CONTACT 4-25
Page 1 and 2:
AUTOMATION User Manual onlinecompon
Page 3 and 4:
AUTOMATION User Manual Configuring
Page 5 and 6:
UM EN FLX ASI SYS PRO General terms
Page 7 and 8:
Table of Contents 1 Fieldline Exten
Page 9 and 10:
Table of Contents 4.2.5 Connecting
Page 11 and 12:
Fieldline Extension and the AS-Inte
Page 13 and 14:
1.3 Documentation for AS-i Devices
Page 15 and 16:
1.5 AS-Interface standardization Fi
Page 17 and 18:
1.6 Different data transmission typ
Page 19 and 20:
! " * ) 4 + ! ! " " 4 , 7 7 5
Page 21 and 22: AS-Interface Masters/Gateways 2 AS-
Page 23 and 24: AS-Interface Masters/Gateways 2.1.2
Page 25 and 26: AS-Interface Masters/Gateways Snapp
Page 27 and 28: 2.1.6 Power Supply and AS-i Connect
Page 33 and 34: AS-Interface Masters/Gateways Conne
Page 35 and 36: PROFIBUS AS-Interface Masters/Gatew
Page 37 and 38: AS-Interface Masters/Gateways AS-i
Page 39 and 40: 2.3.5 Connecting the Master FLX ASI
Page 41 and 42: 2.3.7 Diagnostic and Status Indicat
Page 43 and 44: Power Supply Units 3 Power Supply U
Page 45 and 46: Power Supply Units 3.4 Housing Dime
Page 47 and 48: Power Supply Units 3.5.2 Mounting o
Page 49 and 50: Slaves 4 Slaves Up to 62 slaves can
Page 51 and 52: Slaves 4.1.2 Housing Dimensions of
Page 53 and 54: Slaves 4.1.4 Mounting Fieldline Ext
Page 55 and 56: Slaves 4.1.5 Flat-Ribbon Cable A ke
Page 57 and 58: Slaves 4.1.7 Connecting AS-Interfac
Page 59 and 60: Slaves 4.1.9 Labeling Fieldline Ext
Page 61 and 62: Slaves 4.1.11 Setting the Address f
Page 63 and 64: Slaves 4.2 Description for Fieldlin
Page 65 and 66: Slaves 4.2.2 Housing Dimensions of
Page 67 and 68: Slaves 4.2.4 Mounting Fieldline Ext
Page 69 and 70: Slaves 4.2.7 Pin Assignment of the
Page 71: Slaves 4.2.10 Setting the Address f
Page 75 and 76: Slaves 4.3.4 Description for ASI IO
Page 77 and 78: Slaves 4.3.8 Terminal Assignment of
Page 79 and 80: Slaves 4.3.10 Setting the Address f
Page 81 and 82: Slaves Setting the switch ASI IO ME
Page 83 and 84: Configuration 5 Configuration Befor
Page 85 and 86: Configuration 5.6 Integrating the A
Page 87 and 88: 6 General Information About Install
Page 89 and 90: 6.2 Installation Instructions Gener
Page 91 and 92: Startup 7 Startup 7.1 Mounting and
show all

UM EN FLX ASI SYS PRO INST - Onlinecomponents.com

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?