UM EN FLX ASI SYS PRO INST - Onlinecomponents.com

Slaves
4.2.7 Pin Assignment of the Inputs and Outputs
"
Figure 4-23
!
$ ! % # ) "
Pin assignment of the inputs and outputs
Pin Female Input Connector Female Output Connector
1 30 V U S supply voltage for sensors Not used
3 0 V 0 V
4 Input Output
4.2.8 Labeling Fieldline Extension AS-i M8 Devices
The devices can be labeled next to the bus connection (4 in Figure 4-20) and at every
I/O connection.
Depending on the device type, five or ten blank marking labels are supplied as standard with
the devices.
When labeling, proceed as follows:
• Complete a labeling field and snap it into the relevant slot.
• If you want to replace a labeling field, it can be removed using a small screwdriver.
For professional labeling, Phoenix Contact offers the CMS-MARK-WIN software
(see Phoenix Contact CLIPLINE catalog).
onlinecomponents.com
7513_en_01 PHOENIX CONTACT 4-21