UM EN FLX ASI SYS PRO INST - Onlinecomponents.com
UM EN FLX ASI SYS PRO INST - Onlinecomponents.com
UM EN FLX ASI SYS PRO INST - Onlinecomponents.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Power Supply Units<br />
3.5.2 Mounting on the DIN Rail (Flat Mounting Position)<br />
Figure 3-5<br />
Flat mounting position with UTA 107 universal DIN rail adapter<br />
The device is supplied as standard for a narrow mounting position. A flat mounting position<br />
is achieved by mounting the device at a 90° angle to the DIN rail.<br />
To do this, mount the UTA 107 DIN rail adapter as shown in Figure 3-5 (Torx T10 mounting<br />
screws, tightening torque of 0.8 - 0.9 Nm (7 - 8 lb in)). No additional mounting material is<br />
required.<br />
3.6 Connecting the Power Supply Units<br />
The device is equipped with plug-in spring-cage terminals. This enables fast device<br />
connection and visible isolation of the electrical connection, if required.<br />
CAUTION:<br />
Connectors may only be operated when the power is switched off.<br />
The following cable cross-sections can be connected:<br />
Solid [mm 2 ] Stranded [mm 2 ] AWG Stripping Length L [mm]<br />
0.2 - 2.5 0.2 - 2.5 24 - 12 10<br />
online<strong>com</strong>ponents.<strong>com</strong><br />
In order to <strong>com</strong>ply with UL approval, use copper cables that are designed for operating<br />
temperatures > 75°C. For reliable and safe-to-touch connections, strip the cable ends<br />
according to Figure 3-6.<br />
Figure 3-6<br />
Stripping length<br />
NOTE:<br />
Each AS-Interface system may only be supplied by one AS-Interface power supply unit.<br />
7513_en_01 PHO<strong>EN</strong>IX CONTACT 3-5
Change language