interbus - Onlinecomponents.com

0D9B
Code Type Description and Remedy
0D78 LB
0D79 LB
0D7E LB
If the dynamic PCP channel is switched on, the
data length of the indicated device is not identical
to the configuration frame (“ page 116).
Add_Error_Info: Error location
(Segment . Position).
If the dynamic PCP channel is switched on, the ID
code of the indicated device is not identical to the
configuration frame (“ page 116).
Add_Error_Info: Error location
(Segment . Position).
The INTERBUS protocol chip in the indicated
device cannot be operated in the specified
configuration, as it does not support the
necessary functions.
Remedy: Replace the device.
0D80 OUT1 Multiple errors at the outgoing bus interface
0D81 (OUT1) of the indicated device.
0D82 Remedy: See Error Code 0C80 on page 89.
0D83 Add_Error_Info: Error location
(Segment . Position).
0D84 OUT1 Multiple errors (timeout) at the outgoing bus
0D85 interface (OUT1) of the indicated device.
0D86 Remedy: See Error Code 0D80.
0D87 Add_Error_Info: Error location
(Segment . Position).
0D88 OUT1 Devices were found at the outgoing bus interface
0D89 (OUT1) of the indicated device, which have not
0D8A been configured. This may also apply to
0D8B INTERBUS cables to which no device is
connected.
Add_Error_Info: Error location
(Segment . Position).
onlinecomponents.com
0D8C OUT1
0D8D
0D8E
0D8F
The bus can be read but not started up.
Remedy: See Error Code 0C8C on page 89.
Add_Error_Info: Error location
(Segment . Position).
0D98 OUT1 See Error Code 0C98 on page 90.
0D99
0D9A
0D9B
5277CC01 97