interbus - Onlinecomponents.com
interbus - Onlinecomponents.com
interbus - Onlinecomponents.com
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
0CCF<br />
Code Type Description and Remedy<br />
0CC0 OUT2<br />
0CC1<br />
0CC2<br />
0CC3<br />
Multiple errors at the outgoing bus interface<br />
(OUT2) of the device:<br />
– An INTERBUS cable is connected to<br />
OUT2 without any devices.<br />
– An INTERBUS cable connected to the<br />
indicated device is faulty.<br />
– A device connected to the indicated device is<br />
faulty.<br />
– Failure of the voltage supply (<strong>com</strong>munications<br />
power U L ) for the module electronics made<br />
available by the bus terminal module.<br />
Remedy: Check the remote bus/local bus.<br />
Add_Error_Info: Error location<br />
(Segment . Position).<br />
0CC4 OUT2 Multiple errors (timeout) at the branching bus<br />
0CC5 interface (OUT2) of the device:<br />
0CC6<br />
0CC7<br />
– An INTERBUS cable connected to the<br />
indicated device is faulty.<br />
– A device connected to the indicated device is<br />
faulty.<br />
– Failure of the voltage supply (<strong>com</strong>munications<br />
power U L ) for the module electronics made<br />
available by the bus terminal module.<br />
Remedy: Check the remote bus/local bus.<br />
Add_Error_Info: Error location<br />
(Segment . Position).<br />
0CC8 OUT2 More than the configured number of devices are<br />
0CC9 connected to the outgoing bus interface<br />
0CCA (OUT2) of the indicated device. This may also<br />
0CCB apply to INTERBUS cables to which no device is<br />
connected.<br />
Remedy: Reduce the number of devices.<br />
Add_Error_Info: Error location<br />
(Segment . Position).<br />
online<strong>com</strong>ponents.<strong>com</strong><br />
0CCC OUT2<br />
0CCD<br />
0CCE<br />
0CCF<br />
The bus can be read but not started up.<br />
Remedy: Modify the length code entry in the<br />
configuration frame (“ page 116) or replace the<br />
device.<br />
Add_Error_Info: Error location<br />
(Segment . Position).<br />
5277CC01 91