interbus - Onlinecomponents.com

0C8F
Code Type Description and Remedy
0C80 OUT1
0C81
0C82
0C83
Multiple errors at the outgoing bus interface
(OUT1) of the indicated device caused by a fault
on the bus cable connected to this bus interface,
in the following device or in a device of the
subsequent local bus.
Remedy: Check the segment:
– Shielding of the bus cables (connectors)
– Grounding/equipotential bonding
– Faulty connectors or joints
– Voltage dips on the communications power for
remote bus devices
– Faulty fiber optic assembly
Add_Error_Info: Error location
(Segment . Position).
0C84 OUT1 Multiple errors (timeout) at the outgoing bus
0C85 interface (OUT1) due to a:
0C86 – Fault on the connected bus cable
0C87 – Fault in the following device
– Fault in a device of the subsequent local bus
Remedy: See Error Code 0C80.
Add_Error_Info: Error location
(Segment . Position).
0C88 OUT1 Devices were found at the outgoing bus interface
0C89 (OUT1) of the indicated device, which have not
0C8A been entered in the active configuration. This may
0C8B also apply to INTERBUS cables to which no
device is connected.
Add_Error_Info: Error location
(Segment . Position).
0C8C OUT1 The bus can be read but not started up.
0C8D
0C8E
0C8F
– The data register was interrupted at the
outgoing remote bus interface (OUT1) of the
indicated device.
– The number of data registers for the device
connected to the outgoing remote bus
interface (OUT1) of the indicated device is not
identical to the length code.
Add_Error_Info: Error location
(Segment . Position).
onlinecomponents.com
5277CC01 89