interbus - Onlinecomponents.com

0C54
Code Type Description and Remedy
0C54 DEV
0C55
0C56
0C57
0C58 DEV
0C59
0C5A
0C5B
0C5C DEV
0C5D
0C5E
0C5F
0C60 DEV
0C61
0C62
0C63
0C64 DEV
0C65
0C66
0C67
The indicated device has a protocol chip, which is
not supported by the controller board firmware.
Remedy: Replace the device with a device that
has a SUPI 3 chip.
Add_Error_Info: Error location
(Segment . Position).
Data transmission was interrupted at the outgoing
remote bus interface (OUT1) of the indicated
device.
Remedy: Check whether the connector is
plugged in or whether the jumper for connector
identification (RBST or LBST) is faulty.
Add_Error_Info: Error location
(Segment . Position).
Data transmission was interrupted at the
branching bus interface (OUT2) of the indicated
device.
Remedy: Check whether the connector is
plugged in or whether the jumper for connector
identification (RBST or LBST) is faulty.
Add_Error_Info: Error location
(Segment . Position).
An error was detected at the unused, outgoing
interface (OUT1) of the indicated device.
Remedy: Check the device and replace if
necessary.
Add_Error_Info: Error location
(Segment . Position).
An error was detected at the unused, branching
interface (OUT2) of the indicated device.
Remedy: Check the device and replace if
necessary.
Add_Error_Info: Error location
(Segment . Position).
onlinecomponents.com
0C68 DEV
0C69
0C6A
0C6B
The transmission time for I/O data was exceeded
on the indicated device.
Add_Error_Info: Error location
(Segment . Position).
86 5277CC01