interbus - Onlinecomponents.com

0C13
Code Type Description and Remedy
0BF5 BUS
Transmission error (CRC error) on the data return
path of the incoming bus interface (IN) of the
indicated device.
Remedy: See Error Code 0BF4 on page 82.
Add_Error_Info: Error location
(Segment . Position).
0BF6 BUS See Error Code 0BF0 on page 82.
Add_Error_Info: Error location
(Segment . Position).
0BF8
0BF9
0BFA
0BFB
0BFC
A multiple error occurred on the indicated device.
It was not possible to find the exact location of the
error. Possible error locations:
– Indicated devices
– The complete bus located prior to the device
– All devices connected to OUT2 of the
indicated device
Remedy: Check the system:
– Shielding of the bus cables (connectors)
– Grounding/equipotential bonding
– Faulty connectors or joints
– Cable breaks
– Voltage dips on the communications power for
remote bus devices
You can view information about the error location
via the PF TEN or CRC TEN menu item (page 28)
("Get_Diag_Info" service (032B hex )).
Add_Error_Info: Error location
(Segment . Position).
See Error Code 0BF0 on page 82, but the error
may be located in several places.
The error may occur on all transmission paths and
devices in the branches located prior to the
indicated device.
onlinecomponents.com
0C10 RB
0C11
0C12
0C13
A device entered in the active configuration and
not marked as switched off is missing from the
connected bus configuration.
Remedy: Compare the bus configuration with the
active configuration. Take the disabled bus
segments into account.
Add_Error_Info: Error location
(Segment . Position).
5277CC01 83