interbus - Onlinecomponents.com
interbus - Onlinecomponents.com interbus - Onlinecomponents.com
0A56 Code Type Description and Remedy 0A56 USER The configuration data transmitted to the controller board using the "Compare_Configuration" service (0317 hex ) does not correspond to the configuration frame specified with the Frame_Reference parameter. The device code (length/ID code) specified by the Add_Error_Info parameter has been entered differently. Remedy: Check the list of transmitted configuration data against the specified configuration frame (“ page 116). Add_Error_Info: Line number of the configuration frame in which the data does not correspond to the transmitted configuration data. 0A57 USER The configuration data transmitted to the controller board using the "Compare_Configuration" service (0317 hex ) does not correspond to the configuration frame specified with the Frame_Reference parameter. Remedy: Check the list of transmitted configuration data against the specified configuration frame (“ page 116). Add_Error_Info:Line number of the configuration frame in which the data does not correspond to the transmitted configuration data. 0A58 USER The configuration data transmitted to the controller board using the "Compare_Configuration" service (0317 hex ) does not correspond to the configuration frame specified with the Frame_Reference parameter. The group number specified by the Add_Error_Info parameter has been entered differently. Remedy: Check the list of transmitted configuration data against the specified configuration frame (“ page 116). Add_Error_Info: Line number of the configuration frame in which the data does not correspond to the transmitted configuration data. onlinecomponents.com 0A59 USER The local system coupler must not be switched. You tried to switch the slave part of the local system coupler. 72 5277CC01
0A64 Code Type Description and Remedy 0A5A USER The "Control_Active_Configuration" service (0713 hex ) was used in an attempt to switch on an active device. Add_Error_Info: Line number of the configuration frame. 0A5B USER The configuration data transmitted to the controller board using the "Compare_Configuration" service (0317 hex ) does not correspond to the configuration frame data specified with the Frame_Reference parameter. A device (specified by the Add_Error_Info parameter), which is to be switched in isolation, has been entered differently. Add_Error_Info: Line number of the configuration frame in which the data does not correspond to the transmitted configuration data. 0A5C USER The "Create_Configuration" service (0710 hex ) was used in an attempt to read a local bus configuration, which contains too many devices (more than 63). 0A60 USER The controller board could not assign a configuration frame (“ page 116). Remedy: Create the configuration frame first. 0A63 USER The diagnostic status or diagnostic parameter registers are in the output address area. Remedy: Always place these registers in the input address area. Add_Error_Info: Variable_ID of the incorrectly assigned register. 0A64 USER Address conflict between a diagnostic register and an IN process data item. Remedy: Using the "Set_Value" service (0750 hex ), place the diagnostic status register and the diagnostic parameter register in address areas, which are not occupied by IN process data. Add_Error_Info: Variable_ID of the register that caused the address conflict. onlinecomponents.com 5277CC01 73
- Page 23 and 24: MODE - DIAG USER Line 1 - USER - Us
- Page 25 and 26: MODE - DIAG DEBG Menu Item (Debug)
- Page 27 and 28: MODE - DIAG 3.2 Unsuccessful Start
- Page 29 and 30: MODE - STAT STAT Menu (Statistics)
- Page 31 and 32: MODE - STAT CRC Menu Item (Transmis
- Page 33 and 34: MODE - OPT RSET Menu Item (Reset) O
- Page 35 and 36: Error Localization If a bus error o
- Page 37 and 38: Remote Bus Error (RBUS) , E= C I
- Page 39 and 40: When detecting a local bus error, d
- Page 41 and 42: transmission paths between these de
- Page 43 and 44: OUT 2 Interface Error , E= C I JE
- Page 45 and 46: Local Bus Error in an Inline Statio
- Page 47 and 48: Device Error (DEV) , E= C I JE? I
- Page 49 and 50: EVENT Message (EVNT) , E= C I JE?
- Page 51 and 52: Error Codes 0BE4 Code Type Descript
- Page 53 and 54: 0913 Code Type Description and Reme
- Page 55 and 56: 092A Code Type Description and Reme
- Page 57 and 58: 093B Code Type Description and Reme
- Page 59 and 60: 0953 Code Type Description and Reme
- Page 61 and 62: 09DB Code Type Description and Reme
- Page 63 and 64: 0A05 Code Type Description and Reme
- Page 65 and 66: 0A1B Code Type Description and Reme
- Page 67 and 68: 0A28 Code Type Description and Reme
- Page 69 and 70: 0A35 Code Type Description and Reme
- Page 71 and 72: 0A4A Code Type Description and Reme
- Page 73: 0A55 Code Type Description and Reme
- Page 77 and 78: 0B81 Code Type Description and Reme
- Page 79 and 80: 0B90 Code Type Description and Reme
- Page 81 and 82: 0BC2 Code Type Description and Reme
- Page 83 and 84: 0BE0 Code Type Description and Reme
- Page 85 and 86: 0C13 Code Type Description and Reme
- Page 87 and 88: 0C4F Code Type Description and Reme
- Page 89 and 90: 0C79 Code Type Description and Reme
- Page 91 and 92: 0C8F Code Type Description and Reme
- Page 93 and 94: 0CCF Code Type Description and Reme
- Page 95 and 96: 0D27 Code Type Description and Reme
- Page 97 and 98: 0D5F Code Type Description and Reme
- Page 99 and 100: 0D9B Code Type Description and Reme
- Page 101 and 102: 1011 Code Type Description and Reme
- Page 103 and 104: 1217 Code Type Description and Reme
- Page 105 and 106: 2010 Code Type Description and Reme
- Page 107 and 108: 202E Code Type Description and Reme
- Page 109 and 110: 8040 Code Type Description and Reme
- Page 111 and 112: 8400 Code Type Description and Reme
- Page 113 and 114: Table 3 Overview of fuse types (Con
- Page 115 and 116: Replacing the INTERBUS Controller B
- Page 117 and 118: E Red LED ON OFF Error message Erro
- Page 119 and 120: Services Offered by Phoenix Contact
- Page 121 and 122: Error Description When did the erro
- Page 123 and 124: Flowchart for Error Removal - HH H
0A56<br />
Code Type Description and Remedy<br />
0A56 USER The configuration data transmitted to the<br />
controller board using the<br />
"Compare_Configuration" service (0317 hex ) does<br />
not correspond to the configuration frame<br />
specified with the Frame_Reference parameter.<br />
The device code (length/ID code) specified by the<br />
Add_Error_Info parameter has been entered<br />
differently.<br />
Remedy: Check the list of transmitted<br />
configuration data against the specified<br />
configuration frame (“ page 116).<br />
Add_Error_Info: Line number of the<br />
configuration frame in which the data does not<br />
correspond to the transmitted configuration data.<br />
0A57 USER The configuration data transmitted to the<br />
controller board using the<br />
"Compare_Configuration" service (0317 hex ) does<br />
not correspond to the configuration frame<br />
specified with the Frame_Reference parameter.<br />
Remedy: Check the list of transmitted<br />
configuration data against the specified<br />
configuration frame (“ page 116).<br />
Add_Error_Info:Line number of the configuration<br />
frame in which the data does not correspond to<br />
the transmitted configuration data.<br />
0A58 USER The configuration data transmitted to the<br />
controller board using the<br />
"Compare_Configuration" service (0317 hex ) does<br />
not correspond to the configuration frame<br />
specified with the Frame_Reference parameter.<br />
The group number specified by the<br />
Add_Error_Info parameter has been entered<br />
differently.<br />
Remedy: Check the list of transmitted<br />
configuration data against the specified<br />
configuration frame (“ page 116).<br />
Add_Error_Info: Line number of the<br />
configuration frame in which the data does not<br />
correspond to the transmitted configuration data.<br />
online<strong>com</strong>ponents.<strong>com</strong><br />
0A59 USER The local system coupler must not be switched.<br />
You tried to switch the slave part of the local<br />
system coupler.<br />
72 5277CC01