interbus - Onlinecomponents.com

0A4A
Code Type Description and Remedy
0A46 USER Addressing error. You specified an incorrect value
for the Address_Direction parameter for the
"Compact_Load_PDRL" service (0328 hex ) or
"Load_PDRL" service (0325 hex ).
Remedy: Enter 1000 hex for input address lists or
2000 hex for output address lists.
Add_Error_Info: PDRL_Index of the incorrect
PDRL entry.
0A47 USER Incorrect entry in the process data reference list
(PDRL). You specified an incorrect or unknown
value for the PDRL_Index parameter.
Add_Error_Info: PDRL_Index of the incorrect
PDRL entry.
0A48 USER Incorrect direct link definition in the process data
reference list (PDRL). You tried to map a process
data item directly to an IN process data item of the
same process data length. One of these entries is
not correct (data direction or data length).
Remedy: Check the direct link definitions.
Add_Error_Info: PDRL_Index of the incorrect
PDRL entry.
0A49 USER The controller board could not start up the
connected bus configuration. You specified an
incorrect number of devices for the
"Compact_Load_PDRL" service (0328 hex ) using
the Entry_Count parameter.
Remedy: Use the "Compact_Read_PDRL"
service (0329 hex ) to compare the process data
assignment with the actual number of devices in
the bus configuration.
Add_Error_Info: Identification whether IN or
OUT list.
0A4A USER The controller board could not read the process
data reference list.
Remedy: Use the "Read_PDRL" service
(0327 hex ) to read process data reference lists that
were loaded with the "Load_PDRL" service
(0325 hex ).
onlinecomponents.com
5277CC01 69