interbus - Onlinecomponents.com

0A35
Code Type Description and Remedy
0A31 USER The controller board cannot process the
"Put_Process_Data_Description_List" service
(0321 hex ) or the
"Get_Process_Data_Description_List" service
(0323 hex ), as the device number used does not
exist.
Add_Error_Info: Non-existent device number in
the format [RRLL].
RR = Remote bus segment number
LL = Local bus segment number
0A32 USER The controller board could not process the
"Put_Process_Data_Description_List" service
(0321 hex ). An invalid value was specified in a
process data description for the PDD_Index
parameter.
Remedy: Assign values in the range from
0000 hex to 7FFF hex for this parameter (except for
6010 hex and 6011 hex ). Every PDD index must be
assigned only once.
Add_Error_Info: Index of the process data
description.
0A33 USER The process data direction (IN or OUT data) was
defined incorrectly.
Remedy: Use the Data_Direction parameter to
define the data direction for the process data
description:
0C hex for IN PDD, 0D hex for OUT PDD.
Add_Error_Info: Index of the process data
description.
0A34 USER The internal address area of a device was
exceeded when writing to a process data item.
Add_Error_Info: Index of the PD object.
0A35 USER A data type and a data length that do not
correspond were specified when writing to a
process data item.
Add_Error_Info: Index of the process data
description.
onlinecomponents.com
5277CC01 67