interbus - Onlinecomponents.com

0A29
Code Type Description and Remedy
0A29 USER When switching devices on or off using the
"Control_Active_Configuration" service (0713 hex )
you caused inconsistencies between mutually
dependent groups.
Add_Error_Info: Line number of the
configuration frame.
0A2A USER Using the "Control_Active_Configuration" service
(0713 hex ) you caused inconsistencies when
switching mutually dependent devices (active/
inactive).
Add_Error_Info: Line number of the
configuration frame.
0A2B USER Status conflict within a group. You assigned
different statuses to devices belonging to one
group.
Remedy: Always assign the same status to the
devices of one group.
Add_Error_Info: Line number of the
configuration frame.
0A2C USER The specified device number does not exist.
Add_Error_Info: Non-existent device number.
0A2D USER You connected too many PCP devices or you
configured more than the permitted number of
PCP devices.
Remedy: Reduce the number of connected or
configured PCP devices. A maximum of 126 PCP
devices is permitted, depending on the controller
board used and the firmware version.
0A2E USER You have reached the firmware memory limit.
Remedy: Reduce the number of modules
occupying less than 1 word of address space.
Alternatively you can rearrange the modules.
Position those devices that occupy less than 1
word one after the other.
onlinecomponents.com
0A2F USER The controller board could not execute the
"Initiate_Load_Configuration" service (0306 hex ),
as the number of devices was specified as "0".
Remedy: Specify the correct number of devices.
0A30 USER Incorrect entry in the process data description list
(PDDL).
Remedy: Check the PDDL.
66 5277CC01