interbus - Onlinecomponents.com

0A28
Code Type Description and Remedy
0A23 USER You assigned inconsistent device levels.
Remedy: Check the configuration frame
(“ page 116). Do not assign different device
levels in a bus segment.
Add_Error_Info: Line number of the
configuration frame.
0A24 USER Within one local bus segment the connected
devices have different operating states.
Not all devices were switched on or off using the
"Control_Active_Configuration" service
(0713 hex ).
Remedy: Switch all devices in a local bus
segment on or off. Only use the Segment_On or
Segment_Off commands for the service.
Add_Error_Info: Line number of the
configuration frame.
0A25 USER The controller board did not accept the group
definition. You assigned different group numbers
for devices in one bus segment.
Remedy: Always assign the same group number
to all devices in one bus segment.
Add_Error_Info: Line number of the
configuration frame.
0A26 USER The controller board did not accept the definition
of an alternative group. The assigned group
number is invalid.
Add_Error_Info: Line number of the
configuration frame.
0A27 USER The controller board did not accept the definition
of an alternative group. The first device in the
alternative group is not a remote bus device.
Add_Error_Info: Line number of the
configuration frame.
onlinecomponents.com
0A28 USER The controller board could not activate the
specified group. You tried to activate several
alternative groups at the same time.
Add_Error_Info: Line number of the
configuration frame.
5277CC01 65