interbus - Onlinecomponents.com

0A1B
Code Type Description and Remedy
0A15 USER You entered an invalid value for the Position
parameter.
Remedy: Check the Position parameter.
Permissible values: 00 hex to 3F hex .
Add_Error_Info: Line number of the
configuration frame.
0A16 USER You specified an invalid value for a device number
(Segment . Position).
Remedy: Check the device. Permissible
for segment: 01 hex to FF hex (1 to 255)
for position: 00 hex to 3F hex (0 to 63)
Add_Error_Info: Invalid device number.
0A17 USER You specified an unknown ID code.
Remedy: Check the parameters of the
configuration frame (“ page 116).
Add_Error_Info: Line number of the
configuration frame.
0A18 USER You activated an invalid bit in the Used_Attributes
parameter.
Remedy: Check the Used_Attributes parameter
of the corresponding service.
Add_Error_Info: Invalid parameter.
0A19 USER The maximum bus configuration was exceeded
when accessing a configuration frame
(“ page 116).
Remedy: Check the last access to the
configuration frame.
Add_Error_Info: Number of devices.
0A1A USER The specified Frame_Reference does not exist or
cannot be assigned.
Remedy: Check the Frame_Reference
parameter.
Add_Error_Info: Invalid Frame_Reference (if
specified).
onlinecomponents.com
0A1B USER The specified configuration frame (“ page 116)
could not be deleted, as it is currently activated.
Remedy: Before deleting the configuration frame,
first deactivate it using the
"Deactivate_Configuration" service (0712 hex ).
Add_Error_Info: Number of the configuration
frame.
5277CC01 63