interbus - Onlinecomponents.com

0A06
Code Type Description and Remedy
0A06 USER The controller board could not access the object
(operating parameter). This access is not
supported by the system management for the
object (e.g., a write access to an object to which
only read access is permitted).
("Set_Value" service (0750 hex ))
0A07 USER The controller board could not access an object.
The object does not exist.
0A08 USER You called a service, which causes a conflict with
a service called previously.
Remedy: Wait for the service called first to be
completed, and then try again.
Add_Error_Info: Code of the service called
previously.
0A10 USER The controller board cannot process the
"Set_Value" service (0750 hex ), as an incorrect
value was specified for the Variable_ID
parameter.
Add_Error_Info: Number of the incorrect
Variable_ID.
0A11 USER The controller board cannot process the
"Set_Value" service (0750 hex ). You exceeded the
permissible value range when specifying a
parameter.
Remedy: Check the parameter of this service.
0A12 USER You exceeded the value range of the
Device_Level parameter.
Remedy: Check the Device_Level parameter.
Permissible values: 00 hex to 0F hex .
Add_Error_Info: Line number of the
configuration frame.
onlinecomponents.com
0A14 USER You entered an invalid value for the
Error_Char_Flag parameter.
Remedy: Check the Error_Char_Flag parameter.
Permissible values: 0000 hex or 0001 hex .
Add_Error_Info: Line number of the
configuration frame.
62 5277CC01