interbus - Onlinecomponents.com

09DC
Code Type Description and Remedy
09DC USER The desired file on the parameterization memory
of the controller board could not be accessed. An
error occurred when the file was accessed using
the "File_Seek" service. The file pointer could not
be positioned correctly.
09DD USER A file on the parameterization memory of the
controller board could not be closed. An error
occurred while closing the file.
09DE USER The desired file on the parameterization memory
of the controller board could not be opened:
– The parameterization memory is faulty or
write-protected or is not plugged in.
– No file exists or the file is faulty.
09DF USER The desired file on the parameterization memory
of the controller board could not be deleted. An
error occurred while deleting the file.
09F0 USER There is a maximum number of files that the
parameterization memory of the controller board
can handle. This number was exceeded.
Remedy: Delete the files and reformat the
parameterization memory.
All information stored on the parameterization
memory will be lost during formatting.
09F1 USER The file structure on the parameterization memory
of the controller board cannot be read. The
parameterization memory was written using an
older firmware version.
Remedy: See Error Code 09F0 on page 60.
09F2 USER A file on the parameterization memory of the
controller board cannot be processed. The file
handle is incorrect or invalid.
Remedy: Enter the correct file handle for the file
to be processed.
onlinecomponents.com
09FC USER It is not possible to write to the parameterization
memory. A timeout is triggered. This may be due
to a hardware defect.
Remedy: Replace the parameterization memory.
60 5277CC01