interbus - Onlinecomponents.com

092A
Code Type Description and Remedy
0920 USER You specified a value for the Signal_Index
parameter, which is already in use elsewhere.
Add_Error_Info: Signal_Index
0921 USER State conflict in the signal handler. There is
insufficient memory available on the hardware or
you initiated too many signals.
Remedy: Ensure that there are not too many
signals initiated.
0922 USER State conflict in the action handler. There is
insufficient memory available on the hardware or
you initiated too many actions.
Remedy: Ensure that there are not too many
actions initiated.
0924 USER State conflict in the event handler. There is
insufficient memory available on the hardware or
you initiated too many events.
Remedy: Ensure that there are not too many
events initiated.
0925 USER You specified an undefined value for the
Event_Index parameter.
Add_Error_Info: Event_Index parameter.
0926 USER You specified a value for the Event_Index
parameter, which is already used elsewhere.
Add_Error_Info: Event_Index parameter.
0928 USER The controller board cannot process the called
service. This service can only be used
exclusively.
Remedy: Change the rights for the service or use
a non-exclusive service.
("Change_Exclusive_Rights" service (014F hex ))
0929 USER A message cannot be transmitted. The bit number
of the target address is not known.
Remedy: Select a permitted bit number and send
the message again.
Add_Error_Info: Incorrect bit number.
onlinecomponents.com
092A USER Illegal indication code.
Remedy: Enter the code of the indication that you
wish to enable or disable.
Add_Error_Info: Illegal indication code.
5277CC01 53