interbus - Onlinecomponents.com

0913
Code Type Description and Remedy
0908 USER The called service causes a conflict with another
service called before.
Remedy: Wait for the service called previously to
be completed, and then try again.
Add_Error_Info: Code of the service called
previously.
0909 USER The confirmation, which automatically follows a
service exceeds the maximum permissible length
(firmware error).
Remedy: Check the command. If this does not
solve the problem, please contact Phoenix
Contact.
Add_Error_Info: Size of the confirmation in
bytes.
090A USER The Parameter_Count parameter does not
correspond to the number of subsequent words.
Remedy: Adjust the number of parameters.
Add_Error_Info: Incorrect parameter count
090B USER The controller board cannot enable the specified
service (incorrect password).
Remedy: Use the correct password or a service,
which is not disabled.
0910 USER The service is disabled and cannot be called.
Remedy: Enable the service before calling it or
use a service, which is not disabled.
Add_Error_Info: Code of the disabled service.
0911 USER The controller board cannot enable the specified
service (service has already been enabled).
Remedy: Call the service.
Add_Error_Info: Code of the already enabled
service.
onlinecomponents.com
0912 USER The service is disabled and cannot be called.
Remedy: Enable the service before calling it or
use a service, which is not protected.
Add_Error_Info: Code of the disabled service.
0913 USER The controller board cannot process the called
service. The service is not supported for this
controller board.
Remedy: Use a service that is supported.
5277CC01 51