interbus - Onlinecomponents.com

MODE - OPT
OPT Menu (Options)
The OPT menu item (options) provides comprehensive
firmware information.
, -
1
+ . /
5 + ) 6 1 - 2 6 16 1 - . 9 8 0 9 8 5 - 4 4 5 - 6 + , 6 - 5 6 * 7 5 , - 8 ) , , 4
Figure 14
OPT menu with submenus
SCAN TIME Menu Item (Update Time)
The interval between two data cycles (cycle time) is
displayed.
The cycle time can either be set by the user (e.g., using CMD
software) or determined automatically by the controller board.
The display is updated every 5 seconds.
SCAN
TIME
, 1) /
Line 1:
Line 2:
Line 3:
5 6 ) 6
SCAN
TIME
Update time in milliseconds
OPTI TIME Menu Item (Optimum Update Time)
OPTI Line 1: OPTI
TIME Line 2: TIME
Line 3: Optimum update time for bus operation in
milliseconds
FW-V Menu Item (Firmware Version)
FW-V Line 1: FW-V
Line 3: Firmware version
HW-V Menu Item (Hardware Version)
HW-V Line 1: HW-V
Line 3: Hardware version
# % % * '
onlinecomponents.com
2 6
SER-No. Menu Item (Serial Number)
SER- Line 1: SER-
No. Line 2: No.
A 12-digit serial number is displayed by pressing
ENTER.
30 5277CC01