interbus - Onlinecomponents.com

MODE - STAT
CRC Menu Item (Transmission Error)
CRC (Cyclic Redundancy Check) is a test method for data
integrity. A CRC error indicates that a data cycle has been
transmitted with errors. In addition to these CRC errors, other
transmission errors are counted, e.g., a short-term cable
interrupt.
CRC Line 1: CRC - transmission error
Line 2: Device number
Line 3: Number of transmission errors
PF TEN Menu Item (Peripheral Fault Log)
List of the last ten devices with peripheral faults (the last
device with a peripheral fault is listed in position 1). If there are
more than ten messages, the oldest entry will be removed..
PF TEN Line 1: PF
Line 2: TEN
Line 3: List containing the last ten devices with a
peripheral fault
Line 2: NO CFG
No active configuration frame
Information about the Peripheral Fault
Select a message using the arrow keys. Press
ENTER.
Line 2: Device number
Line 3: Error code
CRC TEN Menu Item (Error Priority)
List of the ten devices with the most transmission errors (the
device with the most errors is listed in position 1). If there are
more than ten messages, the oldest entry will be removed.
CRC
TEN
Line 1: CRC
Line 2: TEN
Line 3: List number (1 - 10)
You can scroll through the list numbers
using the right/left arrow keys.
Information About the Transmission Quality
Select a message using the arrow keys. Press
ENTER.
Line 2: Device number
Line 3: Error code
onlinecomponents.com
5277CC01 29