interbus - Onlinecomponents.com

Information About This Guide
Depending on the version, Generation 4 controller boards
have a diagnostic display or LEDs for status and diagnostic
indication. Diagnostics can also be provided by system
messages (using driver blocks).
This guide describes the operation of the diagnostic display,
the LED signal representation, and system messages
indicated by driver blocks.
The back cover page provides an overview of the
controller board menu structure.
The descriptions refer to firmware Version 4.x. In the text, the
firmware version is indicated using the short form "FW x.x".
When using this guide, please observe the following notes:
The attention symbol refers to an operating
procedure, which if not carefully followed, could
result in damage to hardware and software or
personal injury.
The note symbol gives you tips and advice on the
use of hardware and on software optimization. It also
informs you of conditions that must be strictly
observed to achieve error-free operation. The
symbol is also used to clarify terms.
The text symbol refers you to detailed sources of
information (manuals, data sheets, literature, etc.) on
the subject matter, product, etc. This text also
provides helpful information for the orientation in the
manual.
Please note that software/hardware designations and brand
names of the companies mentioned are, as a rule, protected
by copyright, trademark or patent.
Up-to-date information on Phoenix Contact products is
available on the Internet at www.phoenixcontact.com.
onlinecomponents.com
5277CC01 1