interbus - Onlinecomponents.com

MODE - DIAG
QFLG Menu Item (Quality Flag)
QFLG is displayed if a specific ratio of faulty cycles to errorfree
cycles is exceeded.
QLFG Line 1: QFLG (quality flag)
Line 3: Status of the quality bit in the diagnostic
status register
Bit set: ON
Bit not set: OFF
WFLG Menu Item (Warning Flag)
If no error-free cycles can be transmitted within a set time, this
message appears. In this case, we recommend checking the
bus as this message indicates that a bundled error has
occurred.
WFLG Line 2: WFLG (warning flag)
Line 3: Status of the warning bit in the diagnostic
status register
Bit set: ON
Bit not set: OFF
SNGL Menu Item (Single Error)
A single error does not cause the bus to be disconnected.
SNGL Line 1: SNGL
Line 2: Single errors that have occurred in relation
to the active configuration frame are
displayed as a decimal number.
Even if more than 9999 errors have
occurred, 9999 will flash in the display.
Line 3: Contents of the IPMS error register. It
contains additional error information, which
can be analyzed by specialists.
onlinecomponents.com
26 5277CC01