interbus - Onlinecomponents.com

0D9C
Code Type Description and Remedy
0D9C OUT1
0D9D
0D9E
0D9F
The installed bus configuration consists of more
devices than were configured.
Add_Error_Info: Error location
(Segment . Position).
0DC0 OUT2
0DC1
0DC2
0DC3
Multiple errors at the outgoing bus interface
(OUT2) of the indicated device.
Remedy: See Error Code 0CC0 on page 91.
Add_Error_Info: Error location
(Segment . Position).
0DC4 OUT2 Multiple timeout at the branching bus interface
0DC5 (OUT2) of the indicated device.
0DC6 Remedy: See Error Code 0CC4 on page 91.
0DC7 Add_Error_Info: Error location
(Segment . Position).
0DC8 OUT2 Devices were found at the outgoing bus interface
0DC9 (OUT2) of the indicated device, which have not
0DCA been configured. This may also apply to
0DCB INTERBUS cables to which no device is
connected.
Add_Error_Info: Error location
(Segment . Position).
0DCC OUT2 The bus can be read but not started up.
0DCD Remedy: Modify the length code entry in the
0DCE configuration frame (“ page 116) or replace the
0DCF device.
Add_Error_Info: Error location
(Segment . Position).
0DD0 OUT2 See Error Code 0CD0 on page 92.
0DD1
0DD2
0DD3
onlinecomponents.com
0DD4 OUT2 Local bus error on the 8-wire local bus connected
0DD5 to the indicated device. Possible causes:
0DD6 – Faulty device in the local bus
0DD7 – Faulty local bus cable
– Failure of communications power U L
Remedy: Check the I/O bus.
Add_Error_Info: Error location
(Segment . Position).
98 5277CC01