csmstr - Omega Engineering

CONNECT THE TWO
CRIMSON USER MANUAL - MODULAR CONTROLLER
If you plan to use the USB port to download to the Master, you should take the time to read
the section titled Installing the USB Drivers. The Ethernet port isn’t configured from the
factory, so it can’t be used as a means to download an initial database.
CONNECT THE TWO
That’s it. Connect the device to the MC, and if you’ve selected a master protocol, the
Modular Controller will do the rest. Simply look at the target registers, and you should see the
data being written to them. Try changing the registers that have been set for Device to MC,
and the modules should respond accordingly.
If you’ve configured the Modular Controller to act as a slave, you’ll have to initialize
whatever it is you’re using to communicate with the MC, and read and write the data
accordingly.
PAGE 8
http://www.redlion.net/controller