Mixed Layout Katalog - FCT
Mixed Layout Katalog - FCT Mixed Layout Katalog - FCT
PCB Hole Pattern for Connectors with Right Angled PCB Terminations Leiterplattenlochbild für Steckverbinder mit abgewinkeltem Leiterplattenanschluss All PCB hole patterns apply to male connectors with right angled PCB terminations (signal contacts P5) with metal brackets F1080-13B. When using female connectors the hole pattern must be mirrored on the Y-axis. Measurements without tolerances are in accordance with DIN ISO 2768 m. For the required dimension F and drilling diameters see page 69 and 70. Alle Lochbilder gelten für Stiftsteckverbinder mit abgewinkeltem Leiterplattenanschluss (Signalkontakte P5) und Metallwinkel F1080-13B. Bei Verwendung von Buchsensteckverbindern muss das Lochbild an der Y-Achse gespiegelt werden. Maße ohne Toleranzangabe nach DIN ISO 2768 m. Erforderliches Maß F und Bohrungsdurchmesser siehe Seite 69 und 70. 2.54 0.1 23.52 0.926 16.56 0.652 13.82 0.544 11.05 0.435 8.28 0.326 5.54 0.218 0 1 5 A1 0.218 0.326 0.435 0.544 0.652 5.54 8.28 11.05 13.82 16.56 6 10 0.926 23.52 10.67 0.42 31.75 1.25 22.86 0.9 0.6 15.24 0.35 8.89 2.54 0.1 0 3.81 0.15 0.4 10.16 0.65 16.51 0.9 22.86 1.25 31.75 10.67 0.42 9.4 0.37 11 15 F 16 20 A1 A2 A3 A4 A5 A6 A7 A8 F 1 0.039 0.1 0.598 0.489 0.381 0.272 0.163 15.19 12.42 9.68 6.91 4.14 0 4.14 0.163 6.91 0.272 9.68 0.381 12.42 0.489 15.19 0.598 3 0.118 0.1 3 0.118 0.1 2.54 0.1 31.75 1.25 22.56 0.888 15.82 0.623 9.09 0.358 2.36 0.093 0 4.37 0.172 11.1 0.437 0.652 0.761 0.87 0.978 16.56 19.33 22.1 24.84 A1 A2 A3 A4 A5 A6 1 4 31.75 1.25 10.67 0.42 0.1 2.54 31.75 1.25 22.68 0.893 15.7 0.618 0.435 0.326 0.218 0.109 0.109 0.343 0.618 0.893 11.05 8.28 5.54 2.77 0 2.77 8.71 15.7 22.68 A1 A2 1 6 A3 A4 A5 1.25 31.75 10.67 0.42 9.4 0.37 F 5 7 9.4 0.37 7 12 F 3 0.118 0.1 0 17.96 0.707 20.7 0.815 23.47 0.924 1 0.039 0.1 1 0.039 3 0.118 0.1 0.1 9.68 0.381 6.91 0.272 4.14 0.163 1.4 0.055 0 1.4 0.055 4.14 0.163 80 ML 12/2008 TECHNISCHE ÄNDERUNGEN VORBEHALTEN - MAßE IN MILLIMETER (INCHES IN KLAMMERN)
PCB Hole Pattern for Connectors with Right Angled PCB Terminations Leiterplattenlochbild für Steckverbinder mit abgewinkeltem Leiterplattenanschluss All PCB hole patterns apply to male connectors with right angled PCB terminations (signal contacts P5) with metal brackets F1080-13B. When using female connectors the hole pattern must be mirrored on the Y-axis. Measurements without tolerances are in accordance with DIN ISO 2768 m. For the required dimension F and drilling diameters see page 69 and 70. Alle Lochbilder gelten für Stiftsteckverbinder mit abgewinkeltem Leiterplattenanschluss (Signalkontakte P5) und Metallwinkel F1080-13B. Bei Verwendung von Buchsensteckverbindern muss das Lochbild an der Y-Achse gespiegelt werden. Maße ohne Toleranzangabe nach DIN ISO 2768 m. Erforderliches Maß F und Bohrungsdurchmesser siehe Seite 69 und 70. 2.54 0.1 9.4 0.37 1.25 31.75 22.68 0.893 15.7 0.618 11.05 0.435 8.28 0.326 5.54 0.218 2.77 0.109 0 0.109 0.218 0.326 0.435 0.618 0.893 2.77 5.54 8.28 11.05 15.7 22.68 A1 A2 1 9 A3 A4 10 17 1 0.039 0.1 9.68 0.381 6.91 0.272 4.14 0.163 1.4 0.055 0 1.4 0.055 4.14 0.163 6.91 0.272 9.68 0.381 F 1.25 31.75 10.67 0.42 3 0.118 0.1 9.4 0.37 2.54 0.1 1.25 31.75 22.68 0.893 15.7 0.618 9.68 0.381 11.05 0.435 6.91 0.272 8.28 0.326 4.14 0.163 5.54 0.218 1.4 0.055 2.77 0.109 0 0 1.4 0.055 2.77 0.109 4.14 0.163 5.54 0.218 6.91 0.272 8.28 0.326 9.68 0.381 11.05 0.435 12.42 0.489 13.82 0.544 15.19 17.96 0.598 0.707 16.56 0.652 22.68 0.893 1 11 A1 A2 A3 1 0.039 0.1 12 22 F 31.75 1.25 10.67 0.42 3 0.118 0.1 31.75 1.25 2.54 0.1 22.68 0.893 16.56 0.652 13.82 0.544 11.05 0.435 8.28 0.326 5.54 0.218 2.77 0.109 0 2.77 0.109 5.54 0.218 8.28 0.326 11.05 0.435 13.82 0.544 16.56 0.652 22.68 0.893 31.75 1.25 A1 1 13 A2 0.42 10.67 10.67 0.42 0.37 14 25 9.4 31.75 1.25 F 22.86 0.9 16.05 0.632 9.25 0.364 2.44 0.096 0 6.1 0.24 16.05 0.632 22.86 0.9 15.19 0.598 12.42 0.489 9.68 0.381 6.91 0.272 4.14 0.163 1.4 0.055 0 1.4 0.055 4.14 0.163 6.91 0.272 9.68 0.381 12.42 0.489 15.19 0.598 31.75 1.25 A1 A2 A3 A4 A5 A6 A7 F 1 0.039 0.1 3 0.118 0.1 3 0.118 0.1 DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE ML 12/2008 81
- Page 30 and 31: Coaxial Contacts, Mating Area Dimen
- Page 32 and 33: FMX Coaxial Contacts, 50 Ohm, Right
- Page 34 and 35: FMS Coaxial Contacts, 50 Ohm, Strai
- Page 36 and 37: FMS Coaxial Contacts, 75 Ohm, Strai
- Page 38 and 39: Coaxial Contacts, Mating Area Dimen
- Page 40 and 41: Wiresplice Wiresplice 50 Ohm 50 Ohm
- Page 42 and 43: FME Coaxial Contacts, 50 Ohm, Right
- Page 44 and 45: FME Coaxial Contacts, 75 Ohm, Strai
- Page 46 and 47: FME Coaxial Contacts, 75 Ohm, Right
- Page 48 and 49: PCB Hole Pattern for Connectors wit
- Page 50 and 51: PCB Hole Pattern for Connectors wit
- Page 52 and 53: PCB Hole Pattern for Connectors wit
- Page 54 and 55: PCB Hole Pattern for Connectors wit
- Page 56 and 57: PCB Hole Pattern for Connectors wit
- Page 58 and 59: FBM Coaxial Contacts, Mating Area D
- Page 60 and 61: FBM Coaxial Contacts, 50 Ohm, Strai
- Page 62 and 63: FBM Coaxial Contacts, 50 Ohm, Strai
- Page 64 and 65: High Power Contacts Hochstromkontak
- Page 66 and 67: High Power Contacts, Straight Cable
- Page 68 and 69: High Power Contacts, Straight PCB T
- Page 70 and 71: High Power Contacts, Straight PCB T
- Page 72 and 73: Connectors with High Power Contacts
- Page 74 and 75: PCB Hole Pattern for Connectors wit
- Page 76 and 77: PCB Hole Pattern for Connectors wit
- Page 78 and 79: PCB Hole Pattern for Connectors wit
- Page 82 and 83: PCB Hole Pattern for Connectors wit
- Page 84 and 85: High Voltage Contacts Hochspannungs
- Page 86 and 87: High Voltage Contacts, Straight PCB
- Page 88 and 89: Dimensions Abmessungen Straight Pne
- Page 90 and 91: Mixed Layout Connectors in Waterpro
- Page 92 and 93: General Information on Crimp Connec
- Page 94 and 95: Tools Werkzeuge Crimping Tools for
- Page 96 and 97: Crimping Tools Crimpwerkzeuge Hand
- Page 98 and 99: Accessories Zubehör Sealing Plugs
- Page 100 and 101: General Information on the Construc
- Page 102 and 103: Order Number Index Bestellnummernin
PCB Hole Pattern for Connectors with Right Angled PCB Terminations<br />
Leiterplattenlochbild für Steckverbinder mit abgewinkeltem Leiterplattenanschluss<br />
All PCB hole patterns apply to male connectors with right angled PCB terminations (signal contacts P5) with metal brackets F1080-13B. When using<br />
female connectors the hole pattern must be mirrored on the Y-axis.<br />
Measurements without tolerances are in accordance with DIN ISO 2768 m. For the required dimension F and drilling diameters see page 69 and 70.<br />
Alle Lochbilder gelten für Stiftsteckverbinder mit abgewinkeltem Leiterplattenanschluss (Signalkontakte P5) und Metallwinkel F1080-13B. Bei Verwendung<br />
von Buchsensteckverbindern muss das Lochbild an der Y-Achse gespiegelt werden.<br />
Maße ohne Toleranzangabe nach DIN ISO 2768 m. Erforderliches Maß F und Bohrungsdurchmesser siehe Seite 69 und 70.<br />
2.54 0.1<br />
9.4 0.37<br />
1.25<br />
31.75<br />
22.68 0.893<br />
15.7 0.618<br />
11.05 0.435<br />
8.28 0.326<br />
5.54 0.218<br />
2.77 0.109<br />
0<br />
0.109<br />
0.218<br />
0.326<br />
0.435<br />
0.618<br />
0.893<br />
2.77<br />
5.54<br />
8.28<br />
11.05<br />
15.7<br />
22.68<br />
A1 A2 1<br />
9 A3 A4<br />
10 17<br />
1 0.039<br />
0.1<br />
9.68 0.381<br />
6.91 0.272<br />
4.14 0.163<br />
1.4 0.055<br />
0<br />
1.4 0.055<br />
4.14 0.163<br />
6.91 0.272<br />
9.68 0.381<br />
F<br />
1.25<br />
31.75<br />
10.67 0.42<br />
3 0.118<br />
0.1<br />
9.4 0.37 2.54 0.1<br />
1.25<br />
31.75<br />
22.68 0.893<br />
15.7 0.618<br />
9.68 0.381 11.05 0.435<br />
6.91 0.272<br />
8.28 0.326<br />
4.14 0.163<br />
5.54 0.218<br />
1.4 0.055<br />
2.77 0.109<br />
0<br />
0<br />
1.4 0.055<br />
2.77 0.109<br />
4.14 0.163<br />
5.54 0.218<br />
6.91 0.272<br />
8.28 0.326<br />
9.68 0.381<br />
11.05 0.435<br />
12.42 0.489<br />
13.82 0.544<br />
15.19 17.96 0.598<br />
0.707<br />
16.56 0.652<br />
22.68 0.893<br />
1 11<br />
A1 A2 A3<br />
1 0.039<br />
0.1<br />
12<br />
22<br />
F<br />
31.75 1.25<br />
10.67 0.42<br />
3 0.118<br />
0.1<br />
31.75<br />
1.25<br />
2.54 0.1<br />
22.68<br />
0.893<br />
16.56 0.652<br />
13.82 0.544<br />
11.05 0.435<br />
8.28 0.326<br />
5.54 0.218<br />
2.77 0.109<br />
0<br />
2.77 0.109<br />
5.54 0.218<br />
8.28 0.326<br />
11.05 0.435<br />
13.82 0.544<br />
16.56 0.652<br />
22.68<br />
0.893<br />
31.75<br />
1.25<br />
A1 1 13 A2<br />
0.42<br />
10.67<br />
10.67 0.42<br />
0.37<br />
14<br />
25<br />
9.4<br />
31.75 1.25<br />
F<br />
22.86<br />
0.9<br />
16.05<br />
0.632<br />
9.25 0.364<br />
2.44 0.096<br />
0<br />
6.1 0.24<br />
16.05 0.632<br />
22.86<br />
0.9<br />
15.19 0.598<br />
12.42 0.489<br />
9.68 0.381<br />
6.91 0.272<br />
4.14 0.163<br />
1.4 0.055<br />
0<br />
1.4 0.055<br />
4.14 0.163<br />
6.91 0.272<br />
9.68 0.381<br />
12.42 0.489<br />
15.19 0.598<br />
31.75<br />
1.25<br />
A1 A2 A3 A4 A5 A6 A7<br />
F<br />
1 0.039<br />
0.1<br />
3<br />
0.118<br />
0.1<br />
3 0.118<br />
0.1<br />
DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE ML 12/2008<br />
81