Mixed Layout Katalog - FCT
Mixed Layout Katalog - FCT
Mixed Layout Katalog - FCT
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
PCB Hole Pattern for Connectors with Right Angled PCB Terminations<br />
Leiterplattenlochbild für Steckverbinder mit abgewinkeltem Leiterplattenanschluss<br />
All PCB hole patterns apply to male connectors with right angle PCB contacts (signal contacts P5) and the metal bracket F1080-23 as well as the<br />
coaxial contacts FME018P… or FME020P… (When using female connectors the hole pattern must be mirrored on the Y-axis).<br />
Measurements without tolerances are in accordance with DIN ISO 2768 m.<br />
Alle Lochbilder gelten für Stiftsteckverbinder mit abgewinkeltem Leiterplattenanschluss (Signalkontakte P5) und Metallwinkel F1080–23 sowie<br />
eingebauten Koaxialkontakten FME018P... bzw. FME020P... (bei Verwendung von Buchsensteckverbindern muss das Lochbild an der Y-Achse<br />
gespiegelt werden).<br />
Maße ohne Toleranzangabe nach DIN ISO 2768 m.<br />
9.4 0.37 2x 2.54 0.1<br />
30.55 1.203<br />
20.7 0.815<br />
17.96 0.707<br />
15.19 0.598<br />
12.42 0.489<br />
9.68 0.381<br />
6.91 0.272<br />
4.14 0.163<br />
1.4 0.055<br />
0<br />
1.4 0.055<br />
4.14 0.163<br />
6.91 0.272<br />
9.68 0.381<br />
13.72 0.54<br />
20.57 0.81<br />
A1 A2<br />
1 12<br />
13 24<br />
25 41<br />
1.203<br />
30.55<br />
2x 2.54 0.1<br />
0.37 2x 2.54 0.1<br />
9.4<br />
1.203<br />
30.55<br />
20.7 0.815<br />
17.96 0.707<br />
15.19 0.598<br />
12.42 0.489<br />
9.68 0.381<br />
6.91 0.272<br />
4.14 0.163<br />
1.4 0.055<br />
0<br />
1.4 0.055<br />
4.14 0.163<br />
6.91 0.272<br />
9.68 0.381<br />
12.42 0.489<br />
15.19 0.598<br />
20.57 0.81<br />
1 15 A1<br />
16 29<br />
30 46<br />
30.55 1.203<br />
2x 2.54 0.1<br />
3 0.118<br />
0.1<br />
1 0.039<br />
0.1<br />
22.1 0.87<br />
19.33 0.761<br />
16.56 0.652<br />
13.82 0.544<br />
11.05 0.435<br />
8.28 0.326<br />
5.54 0.218<br />
2.77 0.109<br />
0<br />
2.77 0.109<br />
5.54 0.218<br />
8.28 0.326<br />
11.05 0.435<br />
13.82 0.544<br />
0.47<br />
16.56 0.652<br />
19.33 0.761<br />
22.1 0.87<br />
11.95<br />
0.47<br />
11.94<br />
3 0.118<br />
0.1<br />
1 0.039<br />
0.1<br />
22.1 0.87<br />
19.33 0.761<br />
16.56 0.652<br />
13.82 0.544<br />
11.05 0.435<br />
8.28 0.326<br />
5.54 0.218<br />
2.77 0.109<br />
0<br />
2.77 0.109<br />
5.54 0.218<br />
8.28 0.326<br />
11.05 0.435<br />
13.82 0.544<br />
16.56 0.652<br />
19.33 0.761<br />
22.1 0.87<br />
11.95 0.47<br />
0.47<br />
11.94<br />
DIMENSIONS IN MILLIMETERS - VALUES FOR INCHES IN BRACKETS - TECHNICAL DATA SUBJECT TO CHANGE ML 12/2008<br />
57