Gel Foam
Gel Foam Gel Foam
Gel Tape & Gel Chip ♦ Shock and vibration protection for narrow spaces T h e H y p e r P e r f o r m a n c e Vibration Damper Gel Tape Selection L(mm) x W(mm) x T(mm) GT-1 1,000 x 10 x 1 GT-2 1,000 x 20 x 1 GT-3 1,000 x 10 x 2 GT-4 1,000 x 20 x 2 GT-5 1,000 x 10 x 3 GT-6 1,000 x 20 x 3 Gel Chip Selection D(mm) x W(mm) x T(mm) GC-1 10 x 10 x 3 GC-2 10 x 10 x 5 GC-3 15 x 15 x 3 GC-4 15 x 15 x 5 GC-5 15 x 15 x 10 GC-6 20 x 20 x 3 GC-7 20 x 20 x 5 GC-8 20 x 20 x 10 Specification ♦ High performance damping ♦ Ideal for narrow spaces ♦ Prevents exposure to bumps and jolts ♦ Adhesive on one side ♦ Ideal for where mounts are too thick ♦ Stable performance –40c to 200c ♦ Low compression set Applications ♦ Outdoor radio ♦ Packing Use of four GC-4 chips to cushion outdoor radio Durable packaging GEL-Mec UK
Gel Foam ♦ Outstanding shock absorption properties ♦ Low flammability, performs from –40C to 200C. ♦ Low compression set T h e H y p e r P e r f o r m a n c e Vibration Damper Item(unit) NP Remark Appearance green or white Specific Gravity 0.26 Tensile Strength (MPa) 0.32 JIS K 6251 Elongation (%) 73 JIS K 6251 Young’s Modulus (kPa) 269.5 Specific Heat (J/g . K) 1.15 DSC Thermal Conductivity (W/m . K) 0.06 Specific Volume Resistance Ratio (.cm) 3.8 X 10 14 JIS K 6911 Dielectric Breakdown Strength (kV/mm) 3.8 JIS K 2110 Toluene X Acetone X Chemical Resistance Methanol Distilled H20 Fuel Lubricant NaCI (10%) HCI (10%) NaOH (5%) O Normal Temperature Range (C) -40 ~ 200 O O X X O O JIS K 6258 room temperature X 168h Specification ♦ Environmentally friendly foam which does not use HFC or carbon dioxide as a foaming agent. ♦ Unmodified even after 2,000 hours of testing by sunshine weather meter. ♦ No degradation at temperatures up to 150c, even with short heat resistance to as high as 250c. ♦ Fire retardant without generating halogen based harmful gases such as HF,HCL,HCN,SO2 and S2S, even in the event of combustion. ♦ 1/3000 of compressive residual strain of chloroprene and polyethylene foams and 1/60 of that of urethane foams, making for longer service life. ♦ Superb water repellence, assuring longer periods of heat insulation than glass wool and urethane foams. ♦ Ten times higher gas permeability than organic foams and no sweating or steam as associated with urethane foams. Outstanding durability Applications: ♦ Vibration isolation ♦ Shoe soles Usable from –40c up to 200c. Low compression set. Shock absorption performance remains stable. Durable in any weather.
- Page 2 and 3: Vibration, Noise And Shock Control
- Page 7: Gel Bush Damps loads as low as 200
<strong>Gel</strong> <strong>Foam</strong><br />
♦ Outstanding shock absorption properties<br />
♦ Low flammability, performs from –40C to 200C.<br />
♦ Low compression set<br />
T h e H y p e r P e r f o r m a n c e<br />
Vibration Damper<br />
Item(unit) NP Remark<br />
Appearance<br />
green or white<br />
Specific Gravity 0.26<br />
Tensile Strength (MPa) 0.32 JIS K 6251<br />
Elongation (%) 73 JIS K 6251<br />
Young’s Modulus (kPa) 269.5<br />
Specific Heat (J/g . K) 1.15 DSC<br />
Thermal Conductivity (W/m . K) 0.06<br />
Specific Volume Resistance Ratio (.cm) 3.8 X 10 14 JIS K 6911<br />
Dielectric Breakdown Strength (kV/mm) 3.8 JIS K 2110<br />
Toluene<br />
X<br />
Acetone<br />
X<br />
Chemical<br />
Resistance<br />
Methanol<br />
Distilled H20<br />
Fuel<br />
Lubricant<br />
NaCI (10%)<br />
HCI (10%)<br />
NaOH (5%)<br />
O<br />
Normal Temperature Range (C) -40 ~ 200<br />
O<br />
O<br />
X<br />
X<br />
O<br />
O<br />
JIS K 6258<br />
room<br />
temperature<br />
X 168h<br />
Specification<br />
♦ Environmentally friendly foam which does not use HFC or carbon<br />
dioxide as a foaming agent.<br />
♦ Unmodified even after 2,000 hours of testing by sunshine weather<br />
meter.<br />
♦ No degradation at temperatures up to 150c, even with short heat<br />
resistance to as high as 250c.<br />
♦ Fire retardant without generating halogen based harmful gases<br />
such as HF,HCL,HCN,SO2 and S2S, even in the event of combustion.<br />
♦ 1/3000 of compressive residual strain of chloroprene and<br />
polyethylene foams and 1/60 of that of urethane foams, making<br />
for longer service life.<br />
♦ Superb water repellence, assuring longer periods of heat insulation<br />
than glass wool and urethane foams.<br />
♦ Ten times higher gas permeability than organic foams and no<br />
sweating or steam as associated with urethane foams. Outstanding<br />
durability<br />
Applications:<br />
♦ Vibration isolation<br />
♦ Shoe soles<br />
Usable from –40c up to 200c.<br />
Low compression set.<br />
Shock absorption performance<br />
remains stable.<br />
Durable in any weather.
Change language